QuFe10NiMo TIG Filler Wire - Rod – Fine-Grain Steel S690QL / High-Strength (ER100S-G)
QuFe10NiMo TIG Filler Wire - Rod – Fine-Grain Steel S690QL / High-Strength (ER100S-G)
QuFe10NiMo is the NiMo-alloyed variant for modifying and repairing mould cavities — and, thanks to its optimized corrosion resistance and service hardness, also the filler for joint welding on quenched and tempered fine-grain steels such as S690QL, N-A-XTRA and S700MC. Standard: EN ISO 16834-A G/S 69 4 M21 Mn3Ni1CrMo · AWS A5.28 ER100S-G · EN 12534 G 3 CrNi1 Mo. Achievable hardness: 27–38 HRC.
Recommended base materials
- S550QL1 – S690QL1 — high-strength quenched and tempered fine-grain steels
- N-A-XTRA 56, 63, 70
- S700MC — thermomechanically rolled fine-grain steels
- St. 50 – St. 70 — unalloyed structural steels
- 1.2311, 1.2312, 1.2162, 1.2738, 1.2764, 1.2767 — tempered mould steels
Typical applications
- Joint welding on tempered fine-grain steels (S690QL, N-A-XTRA)
- Crane, vehicle and structural steelwork with high-strength plate
- Modification and repair of mould cavities
- Components under increased corrosion load
- Build-up welding on unalloyed structural steels St. 50 – St. 70
Properties and advantages
- Achievable hardness 27–38 HRC — depending on machining and weld layers
- Optimized corrosion resistance and service hardness thanks to Ni alloying
- Approved for joint welding on tempered fine-grain steels
- Post-processing: EDM-machinable, texturable, polishable, chrome-platable, etchable, nitridable, hardenable
Rod form: Rod lengths 1000 mm , Ø 1,0 mm – 3,2 mm.
Material analysis (wt.-%)
C 0.1 | Si 0.6 | Mn 1.6 | Ni 1.4 | Mo 0.3 | Cr 0.3 | V 0.1 | Fe balance
Download
| Achievable hardness: | 27 - 38 HRC |
|---|---|
| Diameter: | 1,0 mm, 1,2 mm, 1,6 mm, 2,0 mm, 2,4 mm, 3,2 mm |
| Recommendations for basis material: | 1.2162, 1.2311, 1.2312, 1.2738, 1.2764, 1.2767, (N-A-XTRA 56; 63; 70), S550QL1 - S690QL1, S700MC, St.50 - St.70 |
| Refinish: | chrome-plated , erodible , etable , Hardenable , nitridable , polishable, remunerable , structurable |
| Rod length: | 1000 mm |
| Wire: | WIG wire |
Related products
QuFe10Cr is the CrMo-alloyed variant for highly stressed mould cavities in the tempered…
QuFe10Cr is the CrMo-alloyed variant for highly stressed mould cavities in the tempered…
QuP20 is the wire for mould steel AISI P20 (~1.2311) — and its distinguishing feature is…
QuP20 is the wire for mould steel AISI P20 (~1.2311) — and its distinguishing feature is…
QuLPA-Fe10Cr is the laser cladding powder for heavily loaded mould cavities. It matches…
QuFe10 is the standard filler metal for modifying and repairing mould cavities in the…
QuFe10 is the standard filler metal for modifying and repairing mould cavities in the…