WIG-Wire

TIG welding wire for repair and cladding

Many alloys from our laser welding wire range are also available as TIG welding wire: tool steels for hot work, cold work and plastic moulds, stainless steel up to duplex and super duplex, hardfacing alloys, nickel-base alloys such as Inconel 625, Inconel 718 and Hastelloy C276, copper and bronzes, aluminium and titanium, and NiFe wire for cast iron.

Use the filter “Recommendation for base materials” to find the right wire for your base material. For laser welding, most of these materials are available as laser welding wire on spools and as rods.

Qu17-4PH TIG filler wire 1.4542 / 17-4PH (X5CrNiCuNb16-4 / AISI 630)

1.4540 1.4542 1.4548

Härte 37 - 40 HRC Ø 1,6 mm

Qu4351 TIG Filler Wire 13/4 / ER410NiMo (1.4351) Turbines, Pumps, Hydropower

1.4002 1.4313 1.4317 1.4414 other 13%Cr-steels

Ø 1,0–3,2 mm

Qu4370 TIG Filler Wire ER307 / 18 8 Mn (1.4370) for Manganese Steel

Hitzebeständige Cr- und CrNi-Stähle Joining of dissimilar material Manganhartstähle

Ø 1,0–3,2 mm

Qu4462 TIG Filler Wire - Duplex - 1.4462 / 2205 (X2CrNiMoN22-5-3)

1.4347 1.4417 1.4460 1.4462 1.4582

Ø 1,0–3,2 mm

Qu4519 TIG Filler Wire 1.4539 / 904L

1.4500 1.4505 1.4506 1.4536 1.4539 1.4585

Ø 1,0–2,4 mm

Qu4842 TIG Filler Wire Heat Resistant 25 20 / ER310 (1.4842) Scale Resistant to 1200 °C

1.4762 1.4826 1.4828 1.4835 1.4840 1.4841 +2

Ø 1,0–3,2 mm

Qu7734 TIG Filler Wire 1.7734 / 15CDV6 CrMoV Quenched & Tempered Steel (Aerospace)

1.7734

Ø 1,0–2,4 mm

Qu819 TIG Filler Wire Cold-Work Tooling 1.2767 / 1.2721 / 1.2714 46–48 HRC

1.2714 1.2721 1.2767 35NCD16 45NiCr-Mo18 60NiCrMo11

Härte 46 - 48 HRC Ø 1,0–2,4 mm

QuAl99,5 TIG Filler Wire Pure Aluminium Al99.7 / ER1070 (3.0259)

Al99,5 Al99,7 Pure aluminium similar

Ø 1,0–2,4 mm

QuAlMg3 TIG Filler Wire Aluminium AlMg3 / ER5754 (3.3536)

AlMg1 AlMg1,5 AlMg1,8 AlMg1SiCu AlMg2Mn0,3 AlMg4,5 AlMg5 AlMgSi0,7 AlMgSi0,8 AlMgSi1 E-AlMgSi G-AlMg3 G-AlMg5 G-AlMg10

Ø 1,0–3,2 mm

QuAlMg4,5Mn TIG Filler Wire Aluminium AlMg4.5Mn / ER5183 (3.3548)

AlMg2,7Mn AlMg3 AlMg4,5Mn AlMg5 AlMgSi0,7 AlMgSi1 AlMgSiCu AlZn4,5Mg1 G-AlMg3 G-AlMg5

Ø 1,0–3,2 mm

QuAlMg5 TIG Filler Wire Aluminium AlMg5 / ER5356 (3.3556)

AlMg1 AlMg1,5 AlMg1,8 AlMg1SiCu AlMg2Mn0,3 AlMg4,5 AlMg5 AlMgSi0,7 AlMgSi0,8 AlMgSi1 E-AlMgSi G-AlMg3 G-AlMg5 G-AlMg10

Ø 1,0–4,0 mm

QuAlSi10 TIG Filler Wire Aluminium AlSi10Mg (3.2383)

Aluminium–Silicon–alloys up to 10% Si

Ø 1,0–2,4 mm

QuAlSi12 TIG Filler Wire Aluminium AlSi12 / ER4047 (3.2585)

Aluminium–Silicon–alloys up to 12% Si different Al alloys among each other

Ø 1,0–2,4 mm

QuAlSi5 TIG Filler Wire Aluminium AlSi5 / ER4043 (3.2245)

Aluminium–Silicon–alloys up to 5% Si different Al alloys among each other

Ø 1,0–3,2 mm

QuAlSi7 TIG Filler Wire Aluminium AlSi7Mg / ER4010 (3.2371)

aluminum–silicon–alloys up to 7% Si

Ø 1,2–2,4 mm

QuAlX10 TIG Filler Wire Aluminium AlSi10Cu4 / AL4145 Polishable, Bright Weld Metal

AlSiCu... e.g. AL2014,AL2036, AL2219 cast alloys: AlSiMg... Joint and build-up welding of forgeable alloys: AlMgCuZn...

Ø 1,0–2,4 mm

QuBeCu25 TIG Filler Wire Beryllium Copper CuBe2 Mould Making, High Thermal Conductivity

Beryllium Copper

Ø 1,0–2,0 mm

QuCu38 TIG Filler Wire Copper-Silver CuAg1 / 2.1211 EDM Electrodes, Ampcoloy

Ampcoloy alloys Cu-Ampcoloy alloys Pure copper grades (erosion electrodes)

Ø 1,0–2,4 mm

QuCu80 TIG Filler Wire Aluminium Bronze CuMn13Al8 / 2.1367, for Ampco Bronzes

Cu-Al complex aluminum bronzes surfacing of steel and cast iron

Ø 1,0–3,2 mm

QuCu81 WIG Filler Wire Aluminium Bronze CuAl8Ni2 / 2.0922 Ductile, 140 HB

Cu-Al complex aluminum bronzes joining different materials surfacing of steel and cast iron

Ø 1,0–3,2 mm

QuCu82 TIG Filler Wire Silicon Bronze CuSi3 / ERCuSi-A (2.1461)

Cu alloys CuZn alloys

Ø 1,0–3,2 mm

QuCu83 TIG Filler Wire Nickel-Aluminium Bronze CuAl9Ni5 / 2.0923

CuAl10Ni5Fe4 CuAl11Ni6Fe5 in general for copper-aluminium-nickel alloys

Ø 1,0–3,2 mm

QuCu84 TIG Filler Wire Silicon Bronze CuSi2 / ERCuSi-A (2.1522)

Cu alloys CuZn5 CuZn10 CuZn15 CuZn alloys

Ø 1,0–3,2 mm