QuCu82 Rod – Laser Welding Wire Silicon Bronze CuSi3 / ERCuSi-A (2.1461)
€174.93
QuCu82 Rod – Laser Welding Wire Silicon Bronze CuSi3 / ERCuSi-A (2.1461)
QuCu82 is the silicon bronze: EN ISO 24373 S Cu 6560 (CuSi3Mn1) · AWS A5.7 ERCuSi-A · material no. 2.1461. With 3 % silicon it is the stronger of quada's two silicon bronzes (80 HB, Rm 390 MPa).
Silicon makes the weld pool more fluid and deoxidising — which is why these wires are the easiest entry into copper welding. They join copper, low-alloy copper alloys, brass (CuZn) and silicon bronzes, and can also be used for build-ups on steel and cast iron. Where more ductility is needed, use QuCu84 (Si 1.8 %, A 45 %).
Recommended base materials
- Copper and low-alloy copper alloys
- Copper-zinc alloys (brass)
- Silicon bronzes
- Build-ups on unalloyed and low-alloy steels and cast iron
Typical applications
- Joint welding on copper and brass
- Build-up welding on steel and cast iron
- Repairs on silicon bronze components
- Art casting and restoration
Properties and advantages
- Si 3 % — fluid, deoxidising weld metal
- 80 HB, Re 150 MPa · Rm 390 MPa · A 40 %
- Stronger than QuCu84 (62 HB)
- Also usable on steel and cast iron
Rod form advantage: Constant wire feed for manual repair welding.
Rod form: Rod lengths 1000 mm and 333 mm, Ø 0,3 mm – 0,8 mm.
Material analysis (wt.-%)
Si 3.0 | Mn 1.00 | Sn 0.10 | Zn 0.10 | Fe 0.07 | Cu balance
Download
| Diameter: | 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
|---|---|
| Recommendations for basis material: | CuZn alloys , Cu alloys |
| Refinish: | material typical treatment |
| Rod length: | 333 mm, 1000 mm |
| Wire: | Laser welding wire |
Related products
QuCu82 is the silicon bronze: EN ISO 24373 S Cu 6560 (CuSi3Mn1) · AWS A5.7 ERCuSi-A ·…
QuCu82 is the silicon bronze: EN ISO 24373 S Cu 6560 (CuSi3Mn1) · AWS A5.7 ERCuSi-A ·…
QuCu84 is the ductile silicon bronze: EN ISO 24373 S/G Cu 6511 (CuSi2Mn1) · AWS A5.7…
QuCu84 is the ductile silicon bronze: EN ISO 24373 S/G Cu 6511 (CuSi2Mn1) · AWS A5.7…
QuCu84 is the ductile silicon bronze: EN ISO 24373 S/G Cu 6511 (CuSi2Mn1) · AWS A5.7…
Qu17-4PH is a precipitation-hardening, corrosion-resistant laser welding wire of the…
QuFe17 is a wire for joint welding on high-strength, quenched and tempered fine-grain…