QuCu84 Rod – Laser Welding Wire Silicon Bronze CuSi2 / ERCuSi-A (2.1522) – Ductile, A 45 %
€148.75
QuCu84 Rod – Laser Welding Wire Silicon Bronze CuSi2 / ERCuSi-A (2.1522) – Ductile, A 45 %
QuCu84 is the ductile silicon bronze: EN ISO 24373 S/G Cu 6511 (CuSi2Mn1) · AWS A5.7 ERCuSi-A · material no. 2.1522. With 1.8 % silicon it is softer than QuCu82 (62 HB) — in return it offers 45 % elongation, the highest figure in quada's entire copper range.
That makes it the choice when the seam has to yield: on thin sheet, on low-zinc brasses (CuZn5, CuZn10, CuZn15) and on build-ups that are later formed or heavily loaded. Also suitable for build-ups on unalloyed steel and cast iron.
Recommended base materials
- Copper and low-alloy copper alloys
- CuZn5, CuZn10, CuZn15 (brass)
- Silicon bronzes
- Build-up welding on unalloyed and low-alloy steel, cast iron
Typical applications
- Joint welding on copper and brass
- Build-up welds requiring high formability
- Thin sheet and components with stress in the seam
- Build-ups on steel and cast iron
Properties and advantages
- A 45 % elongation — the most ductile copper filler in quada's range
- 62 HB, Re 285 MPa · Rm 530 MPa
- Softer and tougher than QuCu82 (Si 3 %)
- Also usable on steel and cast iron
Rod form advantage: Constant wire feed for manual joint welding.
Rod form: Rod lengths 1000 mm and 333 mm, Ø 0,3 mm – 0,8 mm.
Material analysis (wt.-%)
Si 1.80 | Mn 1.00 | Sn 0.20 | P 0.01 | Cu balance
Download
| Diameter: | 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
|---|---|
| Recommendations for basis material: | CuZn5, CuZn10, CuZn15, CuZn alloys , Cu alloys |
| Refinish: | material typical treatment |
| Rod length: | 333 mm, 1000 mm |
| Wire: | Laser welding wire |
Related products
QuCu84 is the ductile silicon bronze: EN ISO 24373 S/G Cu 6511 (CuSi2Mn1) · AWS A5.7…
QuCu84 is the ductile silicon bronze: EN ISO 24373 S/G Cu 6511 (CuSi2Mn1) · AWS A5.7…
QuCu82 is the silicon bronze: EN ISO 24373 S Cu 6560 (CuSi3Mn1) · AWS A5.7 ERCuSi-A ·…
QuCu82 is the silicon bronze: EN ISO 24373 S Cu 6560 (CuSi3Mn1) · AWS A5.7 ERCuSi-A ·…
QuCu82 is the silicon bronze: EN ISO 24373 S Cu 6560 (CuSi3Mn1) · AWS A5.7 ERCuSi-A ·…
Qu17-4PH is a precipitation-hardening, corrosion-resistant laser welding wire of the…
QuFe17 is a wire for joint welding on high-strength, quenched and tempered fine-grain…