QuNi26 Bobbin – Laser Welding Wire Alloy 82 / ERNiCr-3 (2.4806) – Heat-Resistant, Cryogenic to −269 °C
€208.25
Available, delivery time: 1-3 days
QuNi26 Bobbin – Laser Welding Wire Alloy 82 / ERNiCr-3 (2.4806) – Heat-Resistant, Cryogenic to −269 °C
QuNi26 is the all-rounder among nickel-base wires: EN ISO 18274 S Ni 6082 (NiCr20Mn3Nb) · AWS A5.14 ERNiCr-3 · filler material no. 2.4806 — known as Alloy 82.
Its microstructure is austenitic and non-transformable. That is the reason for its range: it is heat-resistant with high hot strength, at the same time cryogenically tough down to −269 °C, and it suits austenite-ferrite joints — exactly where two materials with different thermal expansion meet. Also proven as a buffer layer beneath a hard build-up.
Recommended base materials
- 2.4816 (Alloy 600 / UNS N06600), 2.4817, 2.4851 (UNS N06601)
- 1.4876 (Incoloy 800 / 800H / 800HT), 1.4958
- 1.6907, UNS N06075, UNS N10665
- Heat-resistant Cr and CrNi steels, nickel-base alloys
Typical applications
- Tough joints and build-ups on heat-resistant Cr and CrNi steels
- Austenite-ferrite joints (dissimilar welds)
- Cryogenic engineering — tough down to −269 °C
- Buffer layer beneath hard build-ups
Properties and advantages
- Heat-resistant with high hot strength, and at the same time cryogenically tough to −269 °C
- Non-transformable microstructure — no embrittlement from hardening
- Stainless, well suited to austenite-ferrite joints
- Weld metal: Rp0.2 420 MPa · Rm 660 MPa · A 40 %
Bobbin form: K125, K80, MA125, SH253 — wire weight 100 g–500 g, Ø 0,2 mm – 0,8 mm.
Material analysis (wt.-%)
C < 0.02 | Si < 0.2 | Mn 3.0 | Cr 20.0 | Nb 2.7 | Fe 0.8 | Ni balance
Download
| Bobbin size: | K80, K125, MA125, SH253 |
|---|---|
| Bobbin weight: | 100 g, 200 g, 500 g |
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
| Recommendations for basis material: | 1.4876, 1.4958, 1.6907, 2.4816, 2.4817, 2.4851, Incoloy 800, Incoloy 800H, Incoloy 800HT, UNS N06075, UNS N06600, UNS N06601, UNS N08800, UNS N10665 |
| Refinish: | material typical treatment |
| Wire: | Laser welding wire |
Related products
QuNi26 is the all-rounder among nickel-base wires: EN ISO 18274 S Ni 6082 (NiCr20Mn3Nb) ·…
QuNi24 is a corrosion- and heat-resistant laser welding wire of the nickel-base…
QuNi24 is a corrosion- and heat-resistant laser welding wire of the nickel-base…
QuNi24 is a corrosion- and heat-resistant laser welding wire of the nickel-base…
QuLPA-Ni24 is the nickel-base cladding powder for matching build-ups on Inconel 625 /…
Qu17-4PH is a precipitation-hardening, corrosion-resistant laser welding wire of the…
QuFe17 is a wire for joint welding on high-strength, quenched and tempered fine-grain…