QuLPA-Ni24 Powder – Laser Cladding Powder Inconel 625 / 2.4856 – up to 1100 °C, Tough down to −196 °C

QuNi24 is a corrosion- and heat-resistant laser welding wire of the nickel-base superalloy Inconel 625 (base material 2.4856 / Alloy 625, UNS N06625; filler metal 2.4831 / ERNiCrMo-3 / EN ISO 18274 S Ni 6625). This NiCrMo alloy combines high resistance to pitting and crevice corrosion with elevated-temperature strength up to around 1100 °C and cryogenic toughness down to −196 °C — ideal for the chemical process industry, offshore, exhaust systems and aerospace.Recommended base materials2.4856 — Inconel 625 / Alloy 625 / NiCr22Mo9Nb (primary material)2.4858 — Incoloy 825 (related NiFeCr alloy)1.4529, 1.4539, 1.4876 — high-alloy special stainless steelsJoining ferritic↔austenitic steels, build-up welding on steelTypical applicationsChemical process industry — acid- and media-resistant componentsOffshore and seawater engineeringExhaust and flue-gas systems, hot components up to ~1100 °CAerospaceJoining ferritic↔austenitic steels, build-up welding on steelProperties and advantagesOutstanding resistance to pitting and crevice corrosionHeat-resistant up to ~1100 °C and tough down to −196 °C; favourable creep valuesStress- and hot-crack safety, high fatigue strength (Mo/Nb in NiCr matrix)All-weld metal: Re 500 N/mm², Rm 760 N/mm², A 35 %; filler metal ERNiCrMo-3Good weldability with low heat input; shielding gas argon 4.6 or betterBobbin form: K125, K250, K80, MA125, SH253 — wire weight 100 g–500 g, Ø 0,2 mm – 0,8 mm. Material analysis (wt.-%)Ni balance | Cr 22.0 | Mo 9.0 | Nb 3.5 | Fe 1.0 | Si 0.25 | Mn 0.20 | C ≤0.03

QuNi24 is a corrosion- and heat-resistant laser welding wire of the nickel-base superalloy Inconel 625 (base material 2.4856 / Alloy 625, UNS N06625; filler metal 2.4831 / ERNiCrMo-3 / EN ISO 18274 S Ni 6625). This NiCrMo alloy combines high resistance to pitting and crevice corrosion with elevated-temperature strength up to around 1100 °C and cryogenic toughness down to −196 °C — ideal for the chemical process industry, offshore, exhaust systems and aerospace.Recommended base materials2.4856 — Inconel 625 / Alloy 625 / NiCr22Mo9Nb (primary material)2.4858 — Incoloy 825 (related NiFeCr alloy)1.4529, 1.4539, 1.4876 — high-alloy special stainless steelsJoining ferritic↔austenitic steels, build-up welding on steelTypical applicationsChemical process industry — acid- and media-resistant componentsOffshore and seawater engineeringExhaust and flue-gas systems, hot components up to ~1100 °CAerospaceJoining ferritic↔austenitic steels, build-up welding on steelProperties and advantagesOutstanding resistance to pitting and crevice corrosionHeat-resistant up to ~1100 °C and tough down to −196 °C; favourable creep valuesStress- and hot-crack safety, high fatigue strength (Mo/Nb in NiCr matrix)All-weld metal: Re 500 N/mm², Rm 760 N/mm², A 35 %; filler metal ERNiCrMo-3Good weldability with low heat input; shielding gas argon 4.6 or betterRod form advantage: Ideal for manual build-up and repair welding with constant wire feed — also for hard-to-reach areas in chemical and plant components.Rod form: Rod lengths 1000 mm and 333 mm, Ø 0,2 mm – 0,8 mm. Material analysis (wt.-%)Ni balance | Cr 22.0 | Mo 9.0 | Nb 3.5 | Fe 1.0 | Si 0.25 | Mn 0.20 | C ≤0.03

QuNi24 is a corrosion- and heat-resistant laser welding wire of the nickel-base superalloy Inconel 625 (base material 2.4856 / Alloy 625, UNS N06625; filler metal 2.4831 / ERNiCrMo-3 / EN ISO 18274 S Ni 6625). This NiCrMo alloy combines high resistance to pitting and crevice corrosion with elevated-temperature strength up to around 1100 °C and cryogenic toughness down to −196 °C — ideal for the chemical process industry, offshore, exhaust systems and aerospace.Recommended base materials2.4856 — Inconel 625 / Alloy 625 / NiCr22Mo9Nb (primary material)2.4858 — Incoloy 825 (related NiFeCr alloy)1.4529, 1.4539, 1.4876 — high-alloy special stainless steelsJoining ferritic↔austenitic steels, build-up welding on steelTypical applicationsChemical process industry — acid- and media-resistant componentsOffshore and seawater engineeringExhaust and flue-gas systems, hot components up to ~1100 °CAerospaceJoining ferritic↔austenitic steels, build-up welding on steelProperties and advantagesOutstanding resistance to pitting and crevice corrosionHeat-resistant up to ~1100 °C and tough down to −196 °C; favourable creep valuesStress- and hot-crack safety, high fatigue strength (Mo/Nb in NiCr matrix)All-weld metal: Re 500 N/mm², Rm 760 N/mm², A 35 %; filler metal ERNiCrMo-3Good weldability with low heat input; shielding gas argon 4.6 or betterTIG advantage: For manual repair and joining welds on chemical, offshore and exhaust components with precise heat input.TIG form: for manual repair welding. Material analysis (wt.-%)Ni balance | Cr 22.0 | Mo 9.0 | Nb 3.5 | Fe 1.0 | Si 0.25 | Mn 0.20 | C ≤0.03

QuNi25 is a nickel-base wire for highly corrosion-resistant steels: DIN EN ISO 17274 S Ni 8065 · AWS A5.14 ERNiFeCr-1 · material no. ~2.4858 (Alloy 825).The weld metal is fully austenitic and therefore highly resistant to stress corrosion cracking and pitting in chloride-bearing media — the two failure modes that defeat ordinary stainless steels in chemical plants. It is designed for exposure to sulphuric and phosphoric acid and is corrosion-resistant in sea water. Besides matching joints it suits dissimilar welds.Recommended base materials2.4858 (Alloy 825), 2.46191.4539 (904L), 1.45291.4500, 1.4563Dissimilar joints between these materialsTypical applicationsChemical plant construction — sulphuric and phosphoric acidComponents in chloride-bearing media (pitting risk)Sea-water applicationsDissimilar joints between nickel-base alloys and stainless steelProperties and advantagesFully austenitic — resistant to stress corrosion crackingPitting-resistant in chloride-bearing mediaResistant to sulphuric and phosphoric acid, sea-water proofWeld metal: Rm ~550 MPa · A ~30 %Bobbin form: K125, K250, K80, MA125, SH253 — wire weight 100 g–500 g, Ø 0,2 mm – 0,6 mm. Material analysis (wt.-%)C < 0.02 | Si < 0.5 | Mn 0.9 | Cr 21.5 | Ni 42.0 | Mo 3.0 | Cu 2.0 | Ti 1.0 | Fe balance

QuNi25 is a nickel-base wire for highly corrosion-resistant steels: DIN EN ISO 17274 S Ni 8065 · AWS A5.14 ERNiFeCr-1 · material no. ~2.4858 (Alloy 825).The weld metal is fully austenitic and therefore highly resistant to stress corrosion cracking and pitting in chloride-bearing media — the two failure modes that defeat ordinary stainless steels in chemical plants. It is designed for exposure to sulphuric and phosphoric acid and is corrosion-resistant in sea water. Besides matching joints it suits dissimilar welds.Recommended base materials2.4858 (Alloy 825), 2.46191.4539 (904L), 1.45291.4500, 1.4563Dissimilar joints between these materialsTypical applicationsChemical plant construction — sulphuric and phosphoric acidComponents in chloride-bearing media (pitting risk)Sea-water applicationsDissimilar joints between nickel-base alloys and stainless steelProperties and advantagesFully austenitic — resistant to stress corrosion crackingPitting-resistant in chloride-bearing mediaResistant to sulphuric and phosphoric acid, sea-water proofWeld metal: Rm ~550 MPa · A ~30 %Rod form advantage: Constant wire feed for manual repair welding on vessels and piping.Rod form: Rod lengths 1000 mm and 333 mm, Ø 0,2 mm – 0,6 mm. Material analysis (wt.-%)C < 0.02 | Si < 0.5 | Mn 0.9 | Cr 21.5 | Ni 42.0 | Mo 3.0 | Cu 2.0 | Ti 1.0 | Fe balance

QuLPA-Ni76 is the corrosion protection powder of the range: DIN EN ISO 18274 S Ni 6276 · AWS ~ERNiCrMo-4 · Hastelloy C276 · filler no. ~2.4886, base material 2.4819.Its strength is the breadth of its resistance: highly resistant to a wide range of corrosion in oxidising and reducing media alike — a combination most materials cannot manage — and well resistant to acids. Mo 16 % and Cr 15.5 % carry this. Per the datasheet it is also well suited for buffer layers and can be deposited on unalloyed, low-alloy and high-alloy steel and cast steel. Hardness 230 HV.Recommended base materials2.4819 — NiMo16Cr15W / Hastelloy C276Ni-Mo-Cr-W alloysBuild-ups on unalloyed, low-alloy and high-alloy steel / cast steelBuffer layersTypical applicationsChemical plant construction — acidsComponents in oxidising and reducing mediaBuffer layers beneath harder build-upsCorrosion protection cladding by laser metal deposition (LMD)Properties and advantagesResistant in oxidising and reducing media alikeGood acid resistanceWell suited for buffer layers (datasheet)230 HV. Grain size 45–90 µmPowder form: grain size 45 - 90 µm — for laser metal deposition (LMD). Material analysis (wt.-%)C 0.12 | Si 0.06 | Mn 1.20 | Cr 15.50 | Mo 16.00 | W 4.50 | Fe 3.00 | V 0.30 | Ni balance

Nickel based alloy for medium hard similar applications to nickel based steels. Also suitable for joints. Application to materials in the Oil, gas and mining industry.Achievable hardness of approx. 42 HRCPackaging: 4 x 5 kg bottlesMaterial analysis C: 0,25 | Fe: 2,5 | Si: 3,4 | Cr: 7,5 | B: 1,65 | Ni: Rest