QuFe13 TIG filler wire – 1.2343 / 1.2344 hot-work steel
QuFe13 TIG filler wire – 1.2343 / 1.2344 hot-work steel
QuFe13 is the welding filler from quada for highly stressed hot-work tools. The alloy is used wherever tools or moulds face combined mechanical, thermal and abrasive load — for example aluminium die casting moulds, plastic injection moulds and hot stamping tools.
Recommended base materials
- 1.2343 — X37CrMoV5-1 (primary material)
- 1.2344 — X40CrMoV5-1
- 1.2367 — X38CrMoV5-3
- 1.2082, 1.2083 — plastic mould steels
- 1.2606 — special alloy
Typical applications
- Aluminium die casting moulds
- Plastic injection moulds
- Hot stamping tools
- Repair and build-up welding on hot-work tools
Properties and advantages
- Achievable hardness: 42–46 HRC
- Crack-free even on multi-layer welding
- Resistant to corrosive plastics
- Conditionally hardenable, machined with carbide tools
TIG advantage: Ideal for manual repair and build-up welding using the Tungsten Inert Gas process — also for larger defects and hard-to-reach areas.
TIG form: for manual repair welding.
Material analysis
C: 0.25 | Si: 0.5 | Mn: 0.7 | Cr: 5.0 | Mo: 4.0 | Ti: 0.6 | Fe: balance
Download
| Achievable hardness: | 42 - 46 HRC |
|---|---|
| Diameter: | 1,0 mm, 1,2 mm, 1,6 mm, 2,0 mm, 2,4 mm, 3,2 mm |
| Recommendations for basis material: | 1.2082, 1.2083, 1.2343, 1.2344, 1.2367, 1.2606 |
| Refinish: | CVD-coatable , chrome-plated , machinable , nitridable , polishable, remunerable |
| Rod length: | 1000 mm |
| Wire: | WIG wire |
Related products
QuFe13 is the welding filler from quada for highly stressed hot-work tools. The alloy is…
QuFe13 is the welding filler from quada for highly stressed hot-work tools. The alloy is…
QuFe13 is the uncoated version of QuFe13: same material, same standard (EN 14700 S Fe 8,…
QuFe13 is the uncoated version of QuFe13: same material, same standard (EN 14700 S Fe 8,…
QuFe14 is the alternative to QuFe13 whenever a lower carbon content and a higher chromium…
QuFe20 is a high wear-resistance hardfacing wire to DIN EN 14700 S Fe 6 for tools exposed…
QuFe21 is a high wear-resistance hardfacing wire to DIN EN 14700 S Fe 6 for tools exposed…