QuCu83 Rod – Laser Welding Wire Nickel-Aluminium Bronze CuAl9Ni5 / 2.0923 – Valves, Pumps, Bearings
€139.23
QuCu83 Rod – Laser Welding Wire Nickel-Aluminium Bronze CuAl9Ni5 / 2.0923 – Valves, Pumps, Bearings
QuCu83 is the nickel-aluminium bronze: EN ISO 24373 S Cu 6328 (CuAl9Ni5) · AWS A5.7 ERCuNiAl · material no. 2.0923. The weld metal reaches 200 HB at Rm 600 MPa.
It is the matching wire for Ni-Al bronzes — the cast and forged alloys CuAl10Ni5Fe4 and CuAl11Ni6Fe5 from which valves, pumps and bearings for marine service are made. That is exactly where its value lies: sea-water resistant with high abrasion and wear resistance. It sits between the other two bronzes: stronger than the ductile QuCu81, tougher than the hard QuCu80.
Recommended base materials
- CuAl10Ni5Fe4
- CuAl11Ni6Fe5
- Copper-aluminium-nickel alloys in general
- Cast and forged parts made of Ni-Al bronzes
- Build-ups on Al bronze, steels and multi-component alloys
Typical applications
- Valves and pumps
- Bearings and sliding surfaces
- Cast and forged parts made of Ni-Al bronze
- Marine applications, offshore, shipbuilding
Properties and advantages
- Sea-water resistant
- High abrasion and wear resistance
- 200 HB, Re 380 MPa · Rm 600 MPa · A 16 %
- Matching to CuAl10Ni5Fe4 and CuAl11Ni6Fe5
Rod form advantage: Constant wire feed when repairing valve seats and pump housings.
Rod form: Rod lengths 1000 mm and 333 mm, Ø 0,3 mm – 0,8 mm.
Material analysis (wt.-%)
Al 8.5–9.5 | Ni 4.0–5.5 | Fe 3.0–5.0 | Mn 0.6–3.5 | Si < 0.10 | Zn < 0.10 | Pb < 0.02 | Cu balance
Download
| Diameter: | 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
|---|---|
| Recommendations for basis material: | CuAl10Ni5Fe4, CuAl11Ni6Fe5, in general for copper-aluminium-nickel alloys |
| Refinish: | material typical treatment |
| Rod length: | 333 mm, 1000 mm |
| Wire: | Laser welding wire |
Related products
QuCu83 is the nickel-aluminium bronze: EN ISO 24373 S Cu 6328 (CuAl9Ni5) · AWS A5.7…
QuCu83 is the nickel-aluminium bronze: EN ISO 24373 S Cu 6328 (CuAl9Ni5) · AWS A5.7…
Qu17-4PH is a precipitation-hardening, corrosion-resistant laser welding wire of the…
QuFe17 is a wire for joint welding on high-strength, quenched and tempered fine-grain…
QuNi22 is a corrosion-resistant laser welding wire of the nickel-base superalloy…
QuNi24 is a corrosion- and heat-resistant laser welding wire of the nickel-base…
QuNi25 is a nickel-base wire for highly corrosion-resistant steels: DIN EN ISO 17274 S Ni…