QuBeCu25 Bobbin – Laser Welding Wire Beryllium Copper CuBe2 – Mould Making, High Thermal Conductivity
€140.42
QuBeCu25 Bobbin – Laser Welding Wire Beryllium Copper CuBe2 – Mould Making, High Thermal Conductivity
QuBeCu25 is the beryllium copper wire: DIN EN 1654 CW101C · CuBe2 / BeCu25 · material no. (old) 2.1247.
In mould making, beryllium copper is the material for a very particular combination of properties: high sliding properties, rapid heat transfer and high electrical conductivity — at strengths approaching steel (Rm 950–1150 MPa). Which is why it sits wherever heat has to be pulled out of the cavity quickly without the part going soft.
Safety note: the datasheet carries a dedicated field “Special note” stating “observe the safety data sheet”. Beryllium-bearing fumes and dust are hazardous to health — ensure effective extraction when welding and consult the safety data sheet.
Recommended base materials
- Beryllium copper (CuBe2 / BeCu25)
Typical applications
- Mould and tool making — repair and build-up
- Cavity areas with high heat removal
- Components under sliding load
Properties and advantages
- Rapid heat transfer at high strength
- High sliding properties and electrical conductivity
- Re 820–1100 MPa · Rm 950–1150 MPa
- Observe the safety data sheet — contains beryllium, extraction required
Bobbin form: K125, K250, K80, MA125, SH253 — wire weight 100 g–500 g, Ø 0,25 mm – 0,8 mm.
Material analysis (wt.-%)
Be 1.90 | Co 0.20 | Ni 0.02 | Fe 0.06 | Si 0.05 | Al 0.03 | Cu balance
Download
| Bobbin size: | K80, K125, K250, MA125, SH253 |
|---|---|
| Bobbin weight: | 100 g, 200 g, 500 g |
| Diameter: | 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm, 0,25 mm |
| Recommendations for basis material: | Beryllium Copper |
| Refinish: | material typical treatment |
| Wire: | Laser welding wire |
Related products
QuBeCu25 is the beryllium copper wire: DIN EN 1654 CW101C · CuBe2 / BeCu25 · material no.…
Qu17-4PH is a precipitation-hardening, corrosion-resistant laser welding wire of the…
QuFe17 is a wire for joint welding on high-strength, quenched and tempered fine-grain…
QuNi22 is a corrosion-resistant laser welding wire of the nickel-base superalloy…
QuNi24 is a corrosion- and heat-resistant laser welding wire of the nickel-base…
QuNi25 is a nickel-base wire for highly corrosion-resistant steels: DIN EN ISO 17274 S Ni…
QuNi26 is the all-rounder among nickel-base wires: EN ISO 18274 S Ni 6082 (NiCr20Mn3Nb) ·…