QuAlMg4,5Mn Bobbin – Laser Welding Wire Aluminium AlMg4.5Mn / ER5183 (3.3548)
€155.89
QuAlMg4,5Mn Bobbin – Laser Welding Wire Aluminium AlMg4.5Mn / ER5183 (3.3548)
QuAlMg4,5Mn is the strongest wire of the AlMg range: EN ISO 18273 S Al 5183 (AlMg4.5Mn) · AWS SFA-5.10 ER5183 · material no. 3.3548. Alongside 4.8 % magnesium it contains around 0.9 % manganese — and that manganese is the difference: it raises the tensile strength of the weld metal to 280 MPa and stabilises the microstructure.
This makes QuAlMg4,5Mn the wire for load-bearing AlMg structures where the seam has to be as strong as the sheet next to it — for example on AlMg4.5Mn itself, the standard material in shipbuilding and vehicle construction.
Recommended base materials
- AlMg4.5Mn, AlMg2.7Mn, AlMg3, AlMg5
- AlMgSi alloys: AlMgSi0.7, AlMgSi1, AlMgSiCu
- AlZn4.5Mg1
- Casting alloys: G-AlMg3, G-AlMg5
Typical applications
- Load-bearing joints on AlMg4.5Mn — shipbuilding, vehicles, vessels
- Repairs where the seam has to carry the full sheet strength
- Pressure vessels and tanks in AlMg alloys
- Joints on AlZn4.5Mg1
Properties and advantages
- Highest strength of the AlMg range: Re 130 MPa · Rm 280 MPa · A 18 % — with high elongation at the same time
- The manganese content stabilises the microstructure
- Identical-type to AlMg4.5Mn, the shipbuilding standard
- Shielding gas argon; post-processing material-typical
Bobbin form: K125, K250, K80, MA125, SH253 — wire weight 100 g–500 g, Ø 0,3 mm – 0,8 mm.
Material analysis (wt.-%)
Si 0.35 | Fe 0.40 | Cu 0.05 | Mg 4.80 | Mn 0.90 | Cr 0.15 | Ti 0.15 | Zn 0.25 | Al balance
Download
| Bobbin size: | K80, K125, K250, MA125, SH253 |
|---|---|
| Bobbin weight: | 100 g, 200 g, 500 g |
| Diameter: | 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
| Recommendations for basis material: | AlMg2,7Mn, AlMg3, AlMg4,5Mn, AlMg5, AlMgSi0,7, AlMgSi1, AlMgSiCu, AlZn4,5Mg1, G-AlMg3, G-AlMg5 |
| Refinish: | material typical treatment |
| Wire: | Laser welding wire |
Related products
QuAlMg4,5Mn is the strongest wire of the AlMg range: EN ISO 18273 S Al 5183 (AlMg4.5Mn) ·…
QuAlMg4,5Mn is the strongest wire of the AlMg range: EN ISO 18273 S Al 5183 (AlMg4.5Mn) ·…
QuAlMgZr is the zirconium-alloyed aluminium filler metal to EN ISO 18273 S Al 5087…
QuAlMgZr is the zirconium-alloyed aluminium filler metal to EN ISO 18273 S Al 5087…
QuAlMg3 is a magnesium-alloyed aluminium filler metal to EN ISO 18273 S Al 5754 (AlMg3) ·…
QuAlMg5 is the most widely used aluminium filler metal of all: EN ISO 18273 S Al 5356…
QuAlMg3 is a magnesium-alloyed aluminium filler metal to EN ISO 18273 S Al 5754 (AlMg3) ·…