QuLPA-Ti5-ELI Powder – Laser Cladding Powder Titanium Grade 23 ELI (Ti-6Al-4V ELI) – also Grade 5
QuLPA-Ti5-ELI Powder – Laser Cladding Powder Titanium Grade 23 ELI (Ti-6Al-4V ELI) – also Grade 5
QuLPA-Ti5-ELI is the ELI-grade titanium powder: Grade 23 is, by standard, the ELI variant of Ti-6Al-4V (Grade 5) — Extra Low Interstitials, meaning reduced levels of oxygen, nitrogen, carbon and iron.
The difference is not cosmetic: interstitial atoms are what make titanium brittle. Fewer of them means higher fracture toughness and ductility at practically the same strength — which is why Grade 23 is the material for implants and highly stressed aerospace parts. The powder suits Grade 23 and Grade 5. Fine fraction −45 +15 µm.
Base materials
- Titanium Grade 23 (Ti-6Al-4V ELI)
- Titanium Grade 5 (Ti-6Al-4V / 3.7165)
Applications
- Medical: implants, prosthetics, surgical instruments
- Aerospace: highly stressed structural components
- Additive repair and build-up of Ti-6Al-4V parts
- Coating and dimensional build-up on titanium Grade 5
Advantages
- ELI quality — higher fracture toughness than standard Grade 5
- Covers Grade 23 and Grade 5 with a single powder
- Fine fraction −45 +15 µm for fine nozzles and thin layers
- Matching weld metal — no mixing zone with dissimilar materials
Powder form: grain size -45 +15 µm — for laser metal deposition (LMD).
Material analysis (wt.-%)
Al 5.50–6.50 | V 3.50–4.50 | O < 0.25 | Fe < 0.25 | Ti bal.
| Grain size: | -45 +15 µm |
|---|---|
| Recommendations for basis material: | Titan Grade 5 , Titan Grade 23 |
| Wire: | Powder |
Related products
QuTitan5 is a high-strength titanium laser welding wire of the alloy Ti-6Al-4V (material…
QuTitan5 is a high-strength titanium laser welding wire of the alloy Ti-6Al-4V (material…