QuTitan5 TIG Filler Wire Titanium Grade 5 (Ti-6Al-4V / 3.7165)
QuTitan5 TIG Filler Wire Titanium Grade 5 (Ti-6Al-4V / 3.7165)
QuTitan5 is a high-strength titanium TIG filler wire of the alloy Ti-6Al-4V (material 3.7165, Grade 5). This alpha-beta alloy combines low weight with high strength (Rm ≈ 900–1,000 MPa) and excellent corrosion resistance — ideal for aerospace, medical technology and highly stressed lightweight components.
Recommended base materials
- 3.7165 — Ti-6Al-4V / Grade 5 (primary material)
- Ti-6Al-4V ELI / Grade 23 — implant grade (identical alloy, lower interstitials)
- 3.7035 — commercially pure titanium Grade 2 (related, for dissimilar joints)
Typical applications
- Aerospace structures
- Medical technology and implants (with ELI grade)
- Motorsport and high-strength lightweight components
- Chemical apparatus construction with strength requirements
- Repair and build-up welding on Ti-6Al-4V components
Properties and advantages
- High strength-to-weight ratio — Rm ≈ 900–1,000 MPa
- Excellent corrosion and seawater resistance
- Biocompatible — suitable for medical and implant technology
- Shielding gas: high-purity argon 4.6+ with trailing and root protection — titanium reacts strongly with oxygen and nitrogen above ~400 °C
TIG advantage: For applying material over large areas and building up thicker sections.
TIG welding wire packaging: 1,000 mm rods, 1 kg cardboard tubes, 5 kg cartons, Ø 1.0 mm, 1,6 mm und 2.0 mmMaterial analysis (wt.-%)
Al 5.5–6.75 | V 3.5–4.5 | Fe ≤0.30 | O ≤0.20 | C ≤0.08 | Ti balance
Download
| Diameter: | 1,0 mm, 1,6 mm, 2,0 mm |
|---|---|
| Recommendations for basis material: | 3.7165, Titan Grade 5 |
| Refinish: | material typical treatment |
| Rod length: | 1000 mm |
| Wire: | WIG wire |
Related products
QuTitan5 is a high-strength titanium laser welding wire of the alloy Ti-6Al-4V (material…
QuLPA-Ti5-ELI is the ELI-grade titanium powder: Grade 23 is, by standard, the ELI variant…
Qu17-4PH is a precipitation-hardening, corrosion-resistant laser welding wire of the…
QuFe17 is a wire for joint welding on high-strength, quenched and tempered fine-grain…
QuFe17 is a wire for joint welding on high-strength, quenched and tempered fine-grain…
QuNi22 is a corrosion-resistant TIG Filler wire of the nickel-base superalloy Hastelloy…
QuNi22 is a corrosion-resistant laser welding wire of the nickel-base superalloy…
QuNi24 is a corrosion- and heat-resistant laser welding wire of the nickel-base…
QuNi25 is a nickel-base wire for highly corrosion-resistant steels: DIN EN ISO 17274 S Ni…
QuNi25 is a nickel-base wire for highly corrosion-resistant steels: DIN EN ISO 17274 S Ni…