QuNi22 Rod – Laser Welding Wire Hastelloy C22 / 2.4602 (Alloy C-22 / UNS N06022)
€329.63
QuNi22 Rod – Laser Welding Wire Hastelloy C22 / 2.4602 (Alloy C-22 / UNS N06022)
QuNi22 is a corrosion-resistant laser welding wire of the nickel-base superalloy Hastelloy C22 (material 2.4602 / Alloy C-22, UNS N06022). This austenitic Ni-Cr-Mo alloy resists pitting and crevice corrosion in both oxidising and reducing media alike — ideal for highly corrosion-resistant build-up (cladding) welds on low-alloy steels and for joining welds of similar base materials.
Recommended base materials
- 2.4602 — Hastelloy C22 / Alloy C-22 / UNS N06022 (primary material)
- Low-alloy steels — as build-up welding / cladding
- Similar and related Ni-Cr-Mo base materials
Typical applications
- Highly corrosion-resistant build-up welding (cladding) on low-alloy steels
- Joining welds of similar and related base materials
- Chemical process industry — acetic acid, contaminated sulfuric acid and other aggressive media
- Flue-gas desulfurisation (FGD), plant and vessel construction
- Pharmaceutical and environmental engineering
Properties and advantages
- Outstanding resistance to pitting and crevice corrosion
- Resistant in oxidising and reducing media alike
- High resistance to stress corrosion cracking
- Good weldability with low heat input; shielding gas argon 4.6 or better
Rod form advantage: Ideal for manual build-up and repair welding with constant wire feed — also for hard-to-reach areas in chemical and plant components.
Rod form: Rod lengths 1000 mm and 333 mm, Ø 0,2 mm – 0,8 mm.
Material analysis (wt.-%)
Ni balance | Cr 21.0 | Mo 13.0 | Fe 3.0 | W 3.0 | Co ≤2.5 | V ≤0.2 | Cu ≤0.2 | Mn ≤0.5 | Si ≤0.1 | C ≤0.01
Download
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
|---|---|
| Recommendations for basis material: | 2.4602, ASTM, B622, B626, F574, Hastelloy C-276, Hastelloy C4, Hastelloy C22, Incoloy825, similar |
| Refinish: | material typical treatment |
| Rod length: | 333 mm, 1000 mm |
| Wire: | Laser welding wire |
Related products
QuNi22 is a corrosion-resistant laser welding wire of the nickel-base superalloy…
Qu17-4PH is a precipitation-hardening, corrosion-resistant laser welding wire of the…
QuFe17 is a wire for joint welding on high-strength, quenched and tempered fine-grain…
QuNi24 is a corrosion- and heat-resistant laser welding wire of the nickel-base…
QuNi25 is a nickel-base wire for highly corrosion-resistant steels: DIN EN ISO 17274 S Ni…
QuNi26 is the all-rounder among nickel-base wires: EN ISO 18274 S Ni 6082 (NiCr20Mn3Nb) ·…
QuNi29 is a pure nickel alloy Ni99.7Mg (material no. ~2.4060) for joint and build-up…