QuFe10NiMo Rod – Laser Welding Wire Fine-Grain Steel S690QL / High-Strength (ER100S-G)
€182.07
QuFe10NiMo Rod – Laser Welding Wire Fine-Grain Steel S690QL / High-Strength (ER100S-G)
QuFe10NiMo is the NiMo-alloyed variant for modifying and repairing mould cavities — and, thanks to its optimized corrosion resistance and service hardness, also the filler for joint welding on quenched and tempered fine-grain steels such as S690QL, N-A-XTRA and S700MC. Standard: EN ISO 16834-A G/S 69 4 M21 Mn3Ni1CrMo · AWS A5.28 ER100S-G · EN 12534 G 3 CrNi1 Mo. Achievable hardness: 27–38 HRC.
Recommended base materials
- S550QL1 – S690QL1 — high-strength quenched and tempered fine-grain steels
- N-A-XTRA 56, 63, 70
- S700MC — thermomechanically rolled fine-grain steels
- St. 50 – St. 70 — unalloyed structural steels
- 1.2311, 1.2312, 1.2162, 1.2738, 1.2764, 1.2767 — tempered mould steels
Typical applications
- Joint welding on tempered fine-grain steels (S690QL, N-A-XTRA)
- Crane, vehicle and structural steelwork with high-strength plate
- Modification and repair of mould cavities
- Components under increased corrosion load
- Build-up welding on unalloyed structural steels St. 50 – St. 70
Properties and advantages
- Achievable hardness 27–38 HRC — depending on machining and weld layers
- Optimized corrosion resistance and service hardness thanks to Ni alloying
- Approved for joint welding on tempered fine-grain steels
- Post-processing: EDM-machinable, texturable, polishable, chrome-platable, etchable, nitridable, hardenable
Rod form advantage: Ideal for manual build-up welding with constant wire feed — also on joints that are hard to access.
Rod form: Rod lengths 1000 mm and 333 mm, Ø 0,2 mm – 0,8 mm.
Material analysis (wt.-%)
C 0.1 | Si 0.6 | Mn 1.6 | Ni 1.4 | Mo 0.3 | Cr 0.3 | V 0.1 | Fe balance
Download
| Achievable hardness: | 27 - 38 HRC |
|---|---|
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,7 mm, 0,8 mm |
| Recommendations for basis material: | (N-A-XTRA 56; 63; 70), 1.2162, 1.2311, 1.2312, 1.2738, 1.2764, 1.2767, S550QL1 - S690QL1, S700MC, St.50 - St.70 |
| Refinish: | Hardenable , chrome-plated , erodible , etable , nitridable , polishable, remunerable , structurable |
| Rod length: | 333 mm, 1000 mm |
| Wire: | Laser welding wire |
Related products
QuFe10NiMo is the NiMo-alloyed variant for modifying and repairing mould cavities — and,…
QuFe10Cr is the CrMo-alloyed variant for highly stressed mould cavities in the tempered…
QuFe10 is the standard filler metal for modifying and repairing mould cavities in the…
QuFe15 is a CrMo2-alloyed filler metal for modifying and repairing mould cavities in the…
QuP20 is the wire for mould steel AISI P20 (~1.2311) — and its distinguishing feature is…
QuFe10Cr is the CrMo-alloyed variant for highly stressed mould cavities in the tempered…
QuFe10Cr is the CrMo-alloyed variant for highly stressed mould cavities in the tempered…