QuCu87 Rod – Laser Welding Wire Copper-Nickel CuNi30 / 2.0837 (ERCuNi) – Offshore, Sea Water
€182.07
QuCu87 Rod – Laser Welding Wire Copper-Nickel CuNi30 / 2.0837 (ERCuNi) – Offshore, Sea Water
QuCu87 is the copper-nickel wire: EN ISO 24373 S/G Cu 7158 (CuNi30) · AWS A5.7 ERCuNi · material no. 2.0837. With 30 % nickel it matches CuNi30Fe (2.0882) and CuNi20Fe (2.0878).
CuNi alloys are the standard material for sea-water piping — in offshore engineering, shipbuilding and desalination plants. The wire is sea-water resistant and highly corrosion resistant, designed for heavily loaded joint welds, not just build-ups.
Recommended base materials
- CuNi30Fe (2.0882)
- CuNi20Fe (2.0878)
- Copper-nickel alloys with up to 30 % nickel
Typical applications
- Offshore engineering
- Desalination plants
- Shipbuilding — sea-water piping
- Chemical plant construction
Properties and advantages
- Sea-water and highly corrosion resistant
- For heavily loaded joint welds
- 115 HB, Rp0.2 210 MPa · Rm 380 MPa · A 30 %
- Titanium-stabilised (Ti 0.50 %) — suppresses porosity
Rod form advantage: Constant wire feed when repairing sea-water piping.
Rod form: Rod lengths 1000 mm and 333 mm, Ø 0,2 mm – 0,8 mm.
Material analysis (wt.-%)
Ni 30.0 | Mn 1.00 | Fe 0.55 | Ti 0.50 | Cu balance
Download
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
|---|---|
| Recommendations for basis material: | Copper-Nickel alloys with up to 30% Nickel, eg. CuNi30Fe (2.0882), CuNi20Fe (2.0878) |
| Refinish: | material typical treatment |
| Rod length: | 333 mm, 1000 mm |
| Wire: | Laser welding wire |
Related products
QuCu87 is the copper-nickel wire: EN ISO 24373 S/G Cu 7158 (CuNi30) · AWS A5.7 ERCuNi ·…
Qu17-4PH is a precipitation-hardening, corrosion-resistant laser welding wire of the…
QuFe17 is a wire for joint welding on high-strength, quenched and tempered fine-grain…
QuNi22 is a corrosion-resistant laser welding wire of the nickel-base superalloy…
QuNi24 is a corrosion- and heat-resistant laser welding wire of the nickel-base…
QuNi25 is a nickel-base wire for highly corrosion-resistant steels: DIN EN ISO 17274 S Ni…
QuNi26 is the all-rounder among nickel-base wires: EN ISO 18274 S Ni 6082 (NiCr20Mn3Nb) ·…