QuMed4337 Rod – Laser Welding Wire ER312 / 1.4337 (29 9) – Medical and Dental
€280.84
QuMed4337 Rod – Laser Welding Wire ER312 / 1.4337 (29 9) – Medical and Dental
QuMed4337 is the 29-9 austenite for medical and dental technology: ER312 · 1.4337 · EN ISO 14343-A W-G 29 9.
Its high ferrite content makes it hot-crack resistant — which is why it is the wire for dissimilar joints and for hard-to-weld steels where other fillers crack. In instrument and dental work exactly this situation is common: different materials on one part, small welds, high demands on freedom from cracking.
What {code} is made for
- Joints between dissimilar steels — including mixed unalloyed and high-alloy grades
- Hard-to-weld steels where identical-type fillers crack
- Buffer layers beneath hard deposits — among others under QuFe20 for multi-layer build-up
- Cold- and hot-work tools (joints and buffering)
Typical applications
- Medical instruments — dissimilar joints
- Dental technology
- Hard-to-weld steels prone to cracking
- Buffer layers beneath harder build-ups
Properties and advantages
- High hot-crack resistance thanks to the ferrite-rich 29/9 austenite — the actual reason for this wire
- Scale-resistant to 1,150 °C, stainless (wet corrosion up to 300 °C)
- Good toughness at high yield strength: Re 600 MPa · Rm 800 MPa · A 20 %
- Tough joints between different steel alloys
- Post-processing: work-hardening hot and cold, chrome-platable, polishable, machinable
Rod form advantage: Ideal for manual build-up welding with constant wire feed — also when laying buffer layers in hard-to-reach places.
Rod form: Rod lengths 1000 mm and 333 mm, Ø 0,2 mm – 0,8 mm.
Material analysis (wt.-%)
C 0.10 | Si 0.4 | Mn 1.80 | Cr 29.0 | Ni 9.0 | Fe balance
Download
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
|---|---|
| Recommendations for basis material: | 1.4085, 1.4762, Joining of dissimilar material |
| Rod length: | 333 mm, 1000 mm |
| Wire: | Dental & medical wire, Laser welding wire |
Related products
QuMed4337 is the 29-9 austenite for medical and dental technology: ER312 · 1.4337 · EN…
Qu4842 is the heat-resistant 25-20 austenite: EN ISO 14343-A G/W 25 20 · AWS ER310 ·…
Qu4842 is the heat-resistant 25-20 austenite: EN ISO 14343-A G/W 25 20 · AWS ER310 ·…
QuFe10 is the standard filler metal for modifying and repairing mould cavities in the…
QuFe10Cr is the CrMo-alloyed variant for highly stressed mould cavities in the tempered…
QuFe10NiMo is the NiMo-alloyed variant for modifying and repairing mould cavities — and,…
QuFe11 is a build-up wire for hot-work tools: DIN EN 14700 S Fe 13, filler material no.…