QuFe65 Bobbin – Laser Welding Wire ER312 / 1.4337 (29 9) for Dissimilar Joints
€129.71
QuFe65 Bobbin – Laser Welding Wire ER312 / 1.4337 (29 9) for Dissimilar Joints
QuFe65 is the universal wire for difficult cases: ER312 / 1.4337 to EN ISO 14343-A W/G 29 9 — an austenitic-ferritic weld metal with roughly 29 % chromium and 9 % nickel. This composition produces a high ferrite content, which makes the seam exceptionally resistant to hot cracking. That is precisely why QuFe65 is chosen when steels have to be joined that do not actually go together.
What {code} is made for
- Joints between dissimilar steels — including mixed unalloyed and high-alloy grades
- Hard-to-weld steels where identical-type fillers crack
- Buffer layers beneath hard deposits — among others under QuFe20 for multi-layer build-up
- Cold- and hot-work tools (joints and buffering)
Typical applications
- Dissimilar joints between unalloyed steel and stainless steel
- Buffer layer beneath high wear-resistance deposits
- Repairs on tools of unknown or mixed materials
- Components under scaling load up to 1,150 °C
- Joints on hard-to-weld, crack-prone steels
Properties and advantages
- High hot-crack resistance thanks to the ferrite-rich 29/9 austenite — the actual reason for this wire
- Scale-resistant to 1,150 °C, stainless (wet corrosion up to 300 °C)
- Good toughness at high yield strength: Re 600 MPa · Rm 800 MPa · A 20 %
- Tough joints between different steel alloys
- Post-processing: work-hardening hot and cold, chrome-platable, polishable, machinable
Bobbin form: K125, K250, K80, MA125, SH253 — wire weight 100 g–500 g, Ø 0,2 mm – 0,8 mm.
Material analysis (wt.-%)
C 0.10 | Si 0.4 | Mn 1.80 | Cr 29.0 | Ni 9.0 | Fe balance
Download
| Bobbin size: | K80, K125, K250, MA125, SH253 |
|---|---|
| Bobbin weight: | 100 g, 200 g, 500 g |
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm, 0,25 mm |
| Recommendations for basis material: | Joining of dissimilar material |
| Refinish: | chrome-plated , cold-strengthening , heat setting , machinable , polishable |
| Wire: | Laser welding wire |
Related products
QuFe65 is the universal wire for difficult cases: ER312 / 1.4337 to EN ISO 14343-A W/G 29…
QuFe65 is the universal wire for difficult cases: ER312 / 1.4337 to EN ISO 14343-A W/G 29…
QuFe11 is a build-up wire for hot-work tools: DIN EN 14700 S Fe 13, filler material no.…
QuFe12 is the hard, temper-resistant build-up wire for hot-work tools: EN 14700 S Fe 3 ·…
QuFe13 is the welding filler from quada for highly stressed hot-work tools. The alloy is…
QuFe13 is the uncoated version of QuFe13: same material, same standard (EN 14700 S Fe 8,…
QuFe14 is the alternative to QuFe13 whenever a lower carbon content and a higher chromium…