QuAlSi7 Bobbin – Laser Welding Wire Aluminium AlSi7Mg / ER4010 (3.2371)
€203.49
QuAlSi7 Bobbin – Laser Welding Wire Aluminium AlSi7Mg / ER4010 (3.2371)
QuAlSi7 is a magnesium-alloyed aluminium filler metal to EN ISO 18273 S Al 4010/4018 (AlSi7Mg) · AWS SFA-5.10 ER4010/4018 · material no. ~3.2371. With roughly 7 % silicon and 0.5–0.8 % magnesium it is matched to AlSi7Mg casting alloys — the material most aluminium chassis and engine components are made from.
The magnesium content is the point: it makes the weld metal age-hardenable. If the component is heat-treated again after the repair, the seam gains strength along with it — unlike a plain AlSi filler without magnesium.
Recommended base materials
- Aluminium-silicon alloys with approx. 7 % Si
- AlSi7Mg casting alloys (e.g. A356 / G-AlSi7Mg)
- Joint and build-up welding
Typical applications
- Repairs to AlSi7Mg castings — chassis, engine, gearbox
- Filling cavities and defects in aluminium castings
- Contour corrections on moulds and prototypes
- Repairs that are subsequently age-hardened
Properties and advantages
- Identical-type to AlSi7Mg — same alloy, same behaviour when anodising and heat-treating
- Age-hardenable thanks to the magnesium content
- Weld metal: Re 40 MPa · Rm 120 MPa · A 8 %
- Shielding gas argon; post-processing material-typical
Bobbin form: K125, K80, MA125, SH253 — wire weight 100 g–500 g, Ø 0,2 mm – 0,6 mm.
Material analysis (wt.-%)
Si 6.5–7.5 | Fe 0.20 | Ti 0.20 | Mg 0.50–0.80 | Al balance
Download
| Bobbin size: | K80, K125, MA125, SH253 |
|---|---|
| Bobbin weight: | 100 g, 200 g, 500 g |
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm |
| Recommendations for basis material: | aluminum–silicon–alloys up to 7% Si |
| Refinish: | material typical treatment |
| Wire: | Laser welding wire |
Related products
QuAlSi7 is a magnesium-alloyed aluminium filler metal to EN ISO 18273 S Al 4010/4018…
Qu17-4PH is a precipitation-hardening, corrosion-resistant laser welding wire of the…
QuFe17 is a wire for joint welding on high-strength, quenched and tempered fine-grain…
QuNi22 is a corrosion-resistant laser welding wire of the nickel-base superalloy…
QuNi24 is a corrosion- and heat-resistant laser welding wire of the nickel-base…
QuNi25 is a nickel-base wire for highly corrosion-resistant steels: DIN EN ISO 17274 S Ni…
QuNi26 is the all-rounder among nickel-base wires: EN ISO 18274 S Ni 6082 (NiCr20Mn3Nb) ·…