QuAlSi5 Rod – Laser Welding Wire Aluminium AlSi5 / ER4043 (3.2245)
€166.60
QuAlSi5 Rod – Laser Welding Wire Aluminium AlSi5 / ER4043 (3.2245)
QuAlSi5 is the aluminium filler metal to EN ISO 18273 S Al 4043A (AlSi5(A)) · AWS SFA-5.10 ER4043 · material no. 3.2245. The silicon content of 5 % lowers the melting point and improves the flow of the weld metal — the classic choice for low-alloyed AlSi materials and wherever two different aluminium alloys meet.
The wire is crack-resistant and easy to handle. The seam stays soft (Rm 120 MPa, A 8 %) and is therefore easy to rework. It does, however, remain visible after anodising — that is not what QuAlSi5 is made for.
Recommended base materials
- Aluminium-silicon alloys up to 5 % Si
- Dissimilar aluminium alloys to each other
- Joint and build-up welding alike
Typical applications
- Repairs to aluminium die castings and cast parts with low silicon content
- Joints between different aluminium alloys
- Build-ups and contour corrections on aluminium tooling
- Filling defects and cavities in aluminium components
Properties and advantages
- Good flow characteristics thanks to 5 % silicon — the classic for AlSi materials
- Crack-resistant, also on dissimilar joints
- Weld metal: Re 40 MPa · Rm 120 MPa · A 8 %
- Shielding gas argon; post-processing material-typical
Rod form advantage: Ideal for manual build-up welding with constant wire feed — also in hard-to-reach areas.
Rod form: Rod lengths 1000 mm and 333 mm, Ø 0,3 mm – 0,8 mm.
Material analysis (wt.-%)
Si 5.0 | Mn < 0.2 | Fe < 0.4 | Al balance
Download
| Diameter: | 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
|---|---|
| Recommendations for basis material: | Aluminium–Silicon–alloys up to 5% Si, different Al alloys among each other |
| Refinish: | material typical treatment |
| Rod length: | 333 mm, 1000 mm |
| Wire: | Laser welding wire |
Related products
QuAlSi5 is the aluminium filler metal to EN ISO 18273 S Al 4043A (AlSi5(A)) · AWS…
QuAlSi5 is the aluminium filler metal to EN ISO 18273 S Al 4043A (AlSi5(A)) · AWS…
QuAlSi12 is the aluminium filler metal with the highest silicon content of the range: EN…
QuAlSi12 is the aluminium filler metal with the highest silicon content of the range: EN…
QuAlSi12 is the aluminium filler metal with the highest silicon content of the range: EN…
Qu17-4PH is a precipitation-hardening, corrosion-resistant laser welding wire of the…
QuFe17 is a wire for joint welding on high-strength, quenched and tempered fine-grain…