QuAlSi10 Rod – Laser Welding Wire Aluminium AlSi10Mg (3.2383)
€209.44
QuAlSi10 Rod – Laser Welding Wire Aluminium AlSi10Mg (3.2383)
QuAlSi10 is the identical-type filler metal for AlSi10Mg to EN ISO 18273 S Al Si10 (S AlSi10Mg) · material no. 3.2383. With 9–11 % silicon and 0.2–0.5 % magnesium it is matched to the most widely used aluminium die-casting material — and to AlSi10Mg parts from additive manufacturing, which use the same alloy.
The high silicon content makes the weld metal strong (Rm 140 MPa) and the melt flow tight — exactly right for filling cavities, pores and defects in die castings without losing the contour.
Recommended base materials
- Aluminium-silicon alloys with approx. 10 % Si
- AlSi10Mg die castings
- AlSi10Mg parts from additive manufacturing (same alloy)
Typical applications
- Filling cavities and pores in aluminium die castings
- Repair and finishing of 3D-printed AlSi10Mg parts
- Contour corrections on die-casting tools
- Build-ups on housings, brackets, heat sinks
Properties and advantages
- Identical-type to AlSi10Mg — seam and base material behave the same when anodising and reworking
- Highest strength of the AlSi range: Re 70 MPa · Rm 140 MPa · A 4 %
- Tight melt flow — good for near-contour build-up
- Shielding gas argon; post-processing material-typical
Rod form advantage: Ideal for manual build-up welding with constant wire feed — also in hard-to-reach areas of castings.
Rod form: Rod lengths 1000 mm and 333 mm, Ø 0,3 mm – 0,8 mm.
Material analysis (wt.-%)
Si 9.0–11.0 | Fe max. 0.50 | Mn max. 0.40 | Mg 0.20–0.50 | Al balance
Download
| Diameter: | 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
|---|---|
| Recommendations for basis material: | Aluminium–Silicon–alloys up to 10% Si |
| Refinish: | material typical treatment |
| Rod length: | 333 mm, 1000 mm |
| Wire: | Laser welding wire |
Related products
QuAlSi10 is the identical-type filler metal for AlSi10Mg to EN ISO 18273 S Al Si10 (S…
QuAlSi10Mg is the identical-type filler metal for AlSi10Mg to EN ISO 18273 S Al Si10 (S…
Qu17-4PH is a precipitation-hardening, corrosion-resistant laser welding wire of the…
QuFe17 is a wire for joint welding on high-strength, quenched and tempered fine-grain…
QuNi22 is a corrosion-resistant laser welding wire of the nickel-base superalloy…
QuNi24 is a corrosion- and heat-resistant laser welding wire of the nickel-base…
QuNi25 is a nickel-base wire for highly corrosion-resistant steels: DIN EN ISO 17274 S Ni…