QuSG2 Bobbin – Laser Welding Wire Mild Steel SG2 / ER70S-6 (1.5125) – S235 to S355, Boiler Making
€165.41
QuSG2 Bobbin – Laser Welding Wire Mild Steel SG2 / ER70S-6 (1.5125) – S235 to S355, Boiler Making
QuSG2 is the standard wire for unalloyed and low-alloy steels: EN ISO 14341-A G 42 4 C/M 3Si1 · AWS ER70S-6 · DIN 8559 SG2 · filler no. 1.5125.
SG2 is the most widely used welding wire there is — here in laser quality. It covers the whole field of structural steels: S235JR to S355J2, the boiler steels P235GH / P265GH / P295GH and fine-grain steels up to S420N. Per the datasheet the weld metal is crack-safe even in multi-layer welding — which is why it also suits larger build-up volumes, not just the thin bead. Hardness 200–250 HB.
Recommended base materials
- S235JRG2 – S355J2
- P235GH, P265GH, P295GH — boiler steels
- Fine-grain steels up to S420N, StE255 – StE380
- St 35 – St 55, GS 38 – GS 52, HI/HII, 17Mn4, 19Mn
Typical applications
- Vehicle construction
- Vessel and boiler construction
- Machine tool construction
- Joints and build-ups on low-alloy steels
Properties and advantages
- Crack-safe even in multi-layer welding (datasheet)
- Covers S235 to S355 and fine grain up to S420N
- Re 430 MPa · Rm 500 MPa · A 22 %
- 200–250 HB
Bobbin form: K125, K250, K80, MA125, SH253 — wire weight 100 g–500 g, Ø 0,3 mm – 0,8 mm.
Material analysis (wt.-%)
C 0.10 | Si 0.80 | Mn 1.40 | Fe balance
Download
| Bobbin size: | K80, K125, K250, MA125, SH253 |
|---|---|
| Bobbin weight: | 100 g, 200 g, 500 g |
| Diameter: | 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
| Recommendations for basis material: | 17Mn 4, 19 Mn, Fine grain up to S420N , GS 38 - GS 52 HI - HII, S235JRG2 - S355J2 P235GH P265GH P295GH, St 35 - St 55, St 35.4 - St 55.4, StE255 - StE 380 |
| Wire: | Laser welding wire |
Related products
QuSG2 is the standard wire for unalloyed and low-alloy steels: EN ISO 14341-A G 42 4 C/M…
QuFe10 is the standard filler metal for modifying and repairing mould cavities in the…
QuFe10Cr is the CrMo-alloyed variant for highly stressed mould cavities in the tempered…
QuFe10NiMo is the NiMo-alloyed variant for modifying and repairing mould cavities — and,…
QuFe11 is a build-up wire for hot-work tools: DIN EN 14700 S Fe 13, filler material no.…
QuFe12 is the hard, temper-resistant build-up wire for hot-work tools: EN 14700 S Fe 3 ·…
QuFe13 is the welding filler from quada for highly stressed hot-work tools. The alloy is…