QuNi36 Rod – Laser Welding Wire Invar 36 / 1.3990 (FeNi36) – Minimal Thermal Expansion
€293.93
QuNi36 Rod – Laser Welding Wire Invar 36 / 1.3990 (FeNi36) – Minimal Thermal Expansion
QuNi36 is Invar: a binary iron-nickel alloy (material no. 1.3990 / ~1.3912, UNS K93600, known as INVAR36® and NILO36®) with an extremely low coefficient of thermal expansion between −250 °C and 200 °C, combined with good ductility and toughness.
That property is delicate: it depends on the carbon and manganese content and on the absence of other impurities. The purity of the filler is therefore no formality here — the wrong wire destroys exactly the property the component was made of Invar for.
Recommended base materials
- 1.3990 / 1.3912 (FeNi36)
- INVAR36®, NILO36® and comparable Invar grades
- UNS K93600
Typical applications
- Moulds for CFRP parts (aerospace)
- Measuring and control instruments, e.g. thermostats
- Plants for liquefied gases (production, storage, transport)
- Satellite construction — frames, brackets, housings for control units
- Bushings for bolted joints between metals of differing expansion
Properties and advantages
- Extremely low thermal expansion between −250 °C and 200 °C
- Good ductility and toughness despite the special alloy
- Cold forming lowers the expansion further
- A staged heat treatment stabilises the expansion coefficient within the desired temperature window
- Weld metal: Re 270 MPa · Rm 490 MPa
Rod form advantage: Constant wire feed for manual rework on large CFRP moulds.
Rod form: Rod lengths 1000 mm and 333 mm, Ø 0,2 mm – 0,8 mm.
Material analysis (wt.-%)
Ni 35.0–38.0 | C 0.20 | Si 0.50 | Mn 0.6 | Ti 0.5 | Cr 0.5 | Nb 1.0 | P 0.025 | S 0.025 | Fe balance
Download
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
|---|---|
| Recommendations for basis material: | 1.3912, 1.3990, Invar qualities , NILO36 |
| Rod length: | 333 mm, 1000 mm |
| Wire: | Laser welding wire |
Related products
QuNi36 is Invar: a binary iron-nickel alloy (material no. 1.3990 / ~1.3912, UNS K93600,…
QuFe10 is the standard filler metal for modifying and repairing mould cavities in the…
QuFe10Cr is the CrMo-alloyed variant for highly stressed mould cavities in the tempered…
QuFe10NiMo is the NiMo-alloyed variant for modifying and repairing mould cavities — and,…
QuFe11 is a build-up wire for hot-work tools: DIN EN 14700 S Fe 13, filler material no.…
QuFe12 is the hard, temper-resistant build-up wire for hot-work tools: EN 14700 S Fe 3 ·…
QuFe13 is the welding filler from quada for highly stressed hot-work tools. The alloy is…