QuMed4430 Rod – Stainless Laser Welding Wire 1.4430 / ER316LSi (19 12 3 L Si)
€280.84
QuMed4430 Rod – Stainless Laser Welding Wire 1.4430 / ER316LSi (19 12 3 L Si)
QuMed4430 is the molybdenum-alloyed austenite: EN ISO 14343-A G/W 19 12 3 L Si · AWS SFA-5.9 ER316LSi (filler material no.: 1.4430). Compared with the 18/8 standard it adds 2.6 % molybdenum — and that shifts the corrosion resistance exactly where chromium alone is no longer enough: into chloride-bearing media.
Molybdenum inhibits pitting. That is why QuMed4430 is the wire for apparatus in the chemical and food industries. Service range −196 °C to 400 °C, low carbon (C 0.02 %) and therefore resistant to intercrystalline corrosion.
Recommended base materials
- 1.4401, 1.4404 — the CrNiMo standard steels (316 / 316L)
- 1.4571 — titanium-stabilised (316Ti)
- 1.4580, 1.4583 — niobium-stabilised variants
Typical applications
- Apparatus and components in the chemical industry
- Food industry — vessels, lines, fittings
- Textile and fuel industries
- Corrosion-resistant build-up welding
- Joints on stainless and heat-resistant steels
Properties and advantages
- 2.6 % molybdenum — considerably higher pitting resistance than the 18/8 standard
- Low carbon (C 0.02 %) and therefore resistant to IC
- Service range −196 °C to 400 °C
- Weld metal: Re 430 MPa · Rm 650 MPa · A 32 %
Rod form advantage: Ideal for manual build-up welding with constant wire feed — also in hard-to-reach areas.
Rod form: Rod lengths 1000 mm and 333 mm, Ø 0,2 mm – 0,8 mm.
Material analysis (wt.-%)
C 0.02 | Si 0.85 | Mn 1.8 | Cr 18.5 | Ni 12.5 | Mo 2.6 | Fe balance
Download
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
|---|---|
| Recommendations for basis material: | 1.4401, 1.4404, 1.4571, 1.4580, 1.4583 |
| Rod length: | 333 mm, 1000 mm |
| Wire: | Dental & medical wire, Laser welding wire |
Related products
QuFe44 is a molybdenum-alloyed stainless steel laser welding wire for corrosion-resistant…
QuFe44 is a molybdenum-alloyed stainless steel laser welding wire for corrosion-resistant…
QuMed4430 is the molybdenum-alloyed austenite: EN ISO 14343-A G/W 19 12 3 L Si · AWS…
QuMed4430 is the molybdenum-alloyed austenite: EN ISO 14343-A G/W 19 12 3 L Si · AWS…
QuMed4576 is a niobium-stabilized CrNiMo laser welding wire to EN ISO 14343-A G/W 19 12 3…
QuFe50 is the niobium-stabilised CrNiMo austenite for chemical and plant engineering:…
QuMed4576 is a niobium-stabilized CrNiMo laser welding wire to EN ISO 14343-A G/W 19 12 3…