QuCu80 Bobbin – Laser Welding Wire Aluminium Bronze CuMn13Al8 / 2.1367 – for Ampco Bronzes, 250 HB
€221.34
QuCu80 Bobbin – Laser Welding Wire Aluminium Bronze CuMn13Al8 / 2.1367 – for Ampco Bronzes, 250 HB
QuCu80 is the strongest of the three aluminium bronzes: EN ISO 24373 S Cu 6338 (CuMn13Al8Fe3Ni2) · AWS A5.7 ERCuMnNiAl · DIN 8555 MSG 31 GZ 200 · material no. 2.1367. The weld metal reaches 250 HB — Rm 650 MPa.
Its home is mould inserts made of Ampco and Ampcoloy bronzes: these highly conductive tooling bronzes are used in die casting and plastic mould making because they dissipate heat quickly — and that is exactly where they crack and wear. Besides build-up and crack welding it suits cladding on cast iron and steel (e.g. drawing tools). Sea-water and cavitation resistant, with good sliding properties.
Recommended base materials
- Cu-Al multi-component bronzes
- Ampco and Ampcoloy alloys (mould inserts)
- Cladding on cast iron and steel
- Build-ups on grey iron, e.g. drawing tools
Typical applications
- Ampco bronze mould inserts — build-up, crack repair, joining
- Drawing tools and build-ups on cast iron
- Components under sliding load
- Sea water and cavitation-loaded components
Properties and advantages
- 250 HB — the strongest of quada's three aluminium bronzes
- Weld metal: Re 400 MPa · Rm 650 MPa · A 10 %
- Sea-water and cavitation resistant
- Good sliding properties — also for bearing surfaces
Bobbin form: K125, K250, K80, MA125, SH253 — wire weight 100 g–500 g, Ø 0,2 mm – 0,8 mm.
Material analysis (wt.-%)
Al 7.5 | Mn 13.0 | Fe 2.5 | Ni 2.5 | Cu balance
Download
| Bobbin size: | K80, K125, K250, MA125, SH253 |
|---|---|
| Bobbin weight: | 100 g, 200 g, 500 g |
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
| Recommendations for basis material: | Cu-Al complex aluminum bronzes, surfacing of steel and cast iron |
| Refinish: | material typical treatment |
| Wire: | Laser welding wire |
Related products
QuCu80 is the strongest of the three aluminium bronzes: EN ISO 24373 S Cu 6338…
QuCu80 is the strongest of the three aluminium bronzes: EN ISO 24373 S Cu 6338…
QuCu81 is the ductile one of the three aluminium bronzes: EN ISO 24373 S Cu 6327…
QuCu81 is the ductile one of the three aluminium bronzes: EN ISO 24373 S Cu 6327…
Qu17-4PH is a precipitation-hardening, corrosion-resistant laser welding wire of the…
QuFe17 is a wire for joint welding on high-strength, quenched and tempered fine-grain…
QuNi22 is a corrosion-resistant laser welding wire of the nickel-base superalloy…