QuCu38 Bobbin – Laser Welding Wire Copper-Silver CuAg1 / 2.1211 – EDM Electrodes, Ampcoloy
€145.18
QuCu38 Bobbin – Laser Welding Wire Copper-Silver CuAg1 / 2.1211 – EDM Electrodes, Ampcoloy
QuCu38 is the silver-alloyed copper wire: EN ISO 24373 S Cu 1897 (CuAg1) · AWS ERCu · material no. 2.1211.
Its special case comes first in the datasheet: the repair of EDM electrodes. There the electrical conductivity must be preserved — a repaired electrode that conducts poorly erodes unevenly. The silver (1 %) refines the structure and raises service hardness through natural ageing without sacrificing conductivity. Also for Ampcoloy alloys. Per the datasheet the weld metal is viscous — typical for copper.
Recommended base materials
- Pure copper grades — in particular EDM electrodes
- Ampcoloy alloys
Typical applications
- Repair of EDM electrodes
- Build-up welding on Ampcoloy components
- Copper parts where conductivity matters
Properties and advantages
- High electrical conductivity — for EDM electrodes
- Ag 1 % → fine-grained structure
- Natural ageing raises service hardness
- 60 HB · Re 80 MPa · Rm 230 MPa · A 18 %
Bobbin form: K125, K80, MA125, SH253 — wire weight 100 g–500 g, Ø 0,2 mm – 0,6 mm.
Material analysis (wt.-%)
Ag 1.00 | Mn 0.20 | Ni 0.30 | Cu balance
Download
| Bobbin size: | K80, K125, MA125, SH253 |
|---|---|
| Bobbin weight: | 100 g, 200 g, 500 g |
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm |
| Recommendations for basis material: | Ampcoloy alloys , Cu-Ampcoloy alloys , Pure copper grades (erosion electrodes) |
| Refinish: | material typical treatment |
| Wire: | Laser welding wire |
Related products
QuCu38 is the silver-alloyed copper wire: EN ISO 24373 S Cu 1897 (CuAg1) · AWS ERCu ·…
Qu17-4PH is a precipitation-hardening, corrosion-resistant laser welding wire of the…
QuFe17 is a wire for joint welding on high-strength, quenched and tempered fine-grain…
QuNi22 is a corrosion-resistant laser welding wire of the nickel-base superalloy…
QuNi24 is a corrosion- and heat-resistant laser welding wire of the nickel-base…
QuNi25 is a nickel-base wire for highly corrosion-resistant steels: DIN EN ISO 17274 S Ni…
QuNi26 is the all-rounder among nickel-base wires: EN ISO 18274 S Ni 6082 (NiCr20Mn3Nb) ·…