QuMed4455 Rod – Stainless Laser Welding Wire 1.4455 (20 16 3 Mn L) – Non-Magnetisable
€339.15
QuMed4455 Rod – Stainless Laser Welding Wire 1.4455 (20 16 3 Mn L) – Non-Magnetisable
QuMed4455 is a special austenite to EN ISO 14343-A G/W 20 16 3 Mn L (filler material no.: 1.4455). The high manganese content of 7.5 % together with 15.5 % nickel stabilises the austenitic structure so completely that the weld metal stays non-magnetisable even after cold forming.
That is the reason to choose this wire: wherever a component has to remain magnetically neutral. Added to this is good resistance to nitric acid, which is why the wire is used in urea synthesis. Service range −196 °C to +400 °C.
Recommended base materials
- 1.3948, 1.3952, 1.3964 — non-magnetisable steels
- 1.4429, 1.4438 — high-alloy CrNiMo steels
- 1.4583 and similar
Typical applications
- Components that must remain magnetically neutral
- Urea synthesis and plants exposed to nitric acid
- Cryogenic components down to −196 °C
- Joints on low-carbon, corrosion-resistant steels
Properties and advantages
- Non-magnetisable — even after cold forming
- Resistant to nitric acid (urea synthesis)
- Cryogenic to −196 °C, low carbon (C 0.03 %)
- Weld metal: Re 400 MPa · Rm 600 MPa · A 30 %
Rod form advantage: Ideal for manual build-up welding with constant wire feed — also in hard-to-reach areas.
Rod form: Rod lengths 1000 mm and 333 mm, Ø 0,2 mm – 0,6 mm.
Material analysis (wt.-%)
C 0.03 | Si 0.60 | Mn 7.50 | P 0.035 | S 0.020 | Cr 20.5 | Mo 3.00 | Ni 15.5 | Fe balance
Download
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm |
|---|---|
| Recommendations for basis material: | 1.3948, 1.3952, 1.3964, 1.4429, 1.4438, 1.4583 |
| Rod length: | 333 mm, 1000 mm |
| Wire: | Dental & medical wire, Laser welding wire |
Related products
QuMed4455 is a special austenite to EN ISO 14343-A G/W 20 16 3 Mn L (filler material no.:…
QuFe44 is a molybdenum-alloyed stainless steel laser welding wire for corrosion-resistant…
QuMed4430 is the molybdenum-alloyed austenite: EN ISO 14343-A G/W 19 12 3 L Si · AWS…
QuMed4576 is a niobium-stabilized CrNiMo laser welding wire to EN ISO 14343-A G/W 19 12 3…
QuFe50 is the niobium-stabilised CrNiMo austenite for chemical and plant engineering:…
QuFe44 is a molybdenum-alloyed stainless steel laser welding wire for corrosion-resistant…
QuMed4430 is the molybdenum-alloyed austenite: EN ISO 14343-A G/W 19 12 3 L Si · AWS…