QuEISI Rod – Laser Welding Wire Special Alloy – 62–66 HRC, the Hardest Deposit
€414.12
QuEISI Rod – Laser Welding Wire Special Alloy – 62–66 HRC, the Hardest Deposit
QuEISI is a patented special alloy without a material number — and at 62–66 HRC the hardest deposit in the entire quada range.
What is remarkable is not the hardness alone but that it comes together with crack resistance: the datasheet explicitly cites crack-safe build-up welding on many ferrous materials. At this hardness that is not a given — most materials in this class crack. Per the datasheet there is good experience on 1.3343–1.3348, on PM steels and on GJS cast iron. The deposit is chrome-platable.
Recommended base materials
- High-performance tool steels
- Low to high alloy steels
- Good experience on 1.3343 – 1.3348
- PM steels and GJS cast iron
Typical applications
- Repair and build-up on high-performance tool steels
- PM steels
- GJS cast iron
- Components under the highest wear loading
Properties and advantages
- 62–66 HRC — the highest attainable hardness in the range
- Crack-safe build-up on many ferrous materials
- Chrome-platable
- Patented special alloy
Rod form: Rod lengths 1000 mm and 333 mm, Ø 0,3 mm – 0,8 mm.
Material analysis (wt.-%)
C 1.00 | Cr 4.00 | Mo 8.00 | V 2.00 | Fe balance
Download
| Achievable hardness: | 62 - 66 HRC |
|---|---|
| Diameter: | 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
| Recommendations for basis material: | 1.3343 - 1.3348, GJS-cast iron, High-performance tool steels, Low to high alloy steels, PM-steels |
| Refinish: | chrome-plated |
| Rod length: | 333 mm, 1000 mm |
| Wire: | Laser welding wire |
Related products
QuEISI is a patented special alloy without a material number — and at 62–66 HRC the…
QuFe10 is the standard filler metal for modifying and repairing mould cavities in the…
QuFe10Cr is the CrMo-alloyed variant for highly stressed mould cavities in the tempered…
QuFe10NiMo is the NiMo-alloyed variant for modifying and repairing mould cavities — and,…
QuFe11 is a build-up wire for hot-work tools: DIN EN 14700 S Fe 13, filler material no.…
QuFe12 is the hard, temper-resistant build-up wire for hot-work tools: EN 14700 S Fe 3 ·…
QuFe13 is the welding filler from quada for highly stressed hot-work tools. The alloy is…