QuFe72 Bobbin – Laser Welding Wire Maraging Steel 1.6356 – Cobalt-Bearing, Age-Hardenable
€243.95
QuFe72 Bobbin – Laser Welding Wire Maraging Steel 1.6356 – Cobalt-Bearing, Age-Hardenable
QuFe72 is the cobalt-bearing maraging wire: EN 14700 S ZFe5 · DIN 8555 W/MSG 3-GZ-350-T · filler no. 1.6356. Ni 18 % · Co 12 % · Mo 4 % · Ti 1.6 % — and only 0.02 % carbon.
That missing carbon is precisely the trick: a maraging steel hardens not through carbon but through precipitation during age hardening. As welded, the deposit is therefore soft and readily machinable — you build up, machine comfortably, and harden afterwards (per the datasheet 3–4 h at 480 °C). The result is optimised resistance to hot wear and thermal cycling. For heavily loaded punching tools, cold shears, hot shear blades, aluminium die-casting moulds and cold forging dies.
Recommended base materials
- Cold and hot work tool steels under elevated loading (datasheet)
Typical applications
- Punching tools and cold shears
- Hot shear blades and cold forging dies
- Aluminium die-casting moulds
- Drawing, embossing and bending tools
Properties and advantages
- Age-hardenable — weld soft, machine, then harden (3–4 h / 480 °C)
- Readily machinable in the as-welded condition
- Nitridable, chrome-platable, CVD-coatable, polishable
- Re 885 MPa · Rm 980 MPa · A 20 %. Per the datasheet 32–35 as welded, 50–54 after age hardening
Bobbin form: K125, K80, MA125, SH253 — wire weight 100 g–500 g, Ø 0,2 mm – 0,8 mm.
Material analysis (wt.-%)
C 0.02 | Ni 18.00 | Co 12.00 | Mo 4.00 | Ti 1.60 | Al 0.10 | Fe balance
Download
| Bobbin size: | K80, K125, MA125, SH253 |
|---|---|
| Bobbin weight: | 100 g, 200 g, 500 g |
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,7 mm, 0,8 mm |
| Recommendations for basis material: | Cold- and warm working steel with high stress |
| Refinish: | CVD-coatable , chrome-plated , machinable , nitridable , polishable, thermosetting |
| Wire: | Laser welding wire |
Related products
QuFe72 is the cobalt-bearing maraging wire: EN 14700 S ZFe5 · DIN 8555 W/MSG 3-GZ-350-T ·…
QuFe72 is the cobalt-bearing maraging wire: EN 14700 S ZFe5 · DIN 8555 W/MSG 3-GZ-350-T ·…
QuFe11 is a build-up wire for hot-work tools: DIN EN 14700 S Fe 13, filler material no.…
QuFe13 is the welding filler from quada for highly stressed hot-work tools. The alloy is…
QuFe13 is the uncoated version of QuFe13: same material, same standard (EN 14700 S Fe 8,…
QuFe14 is the alternative to QuFe13 whenever a lower carbon content and a higher chromium…
QuFe20 is a high wear-resistance hardfacing wire to DIN EN 14700 S Fe 6 for tools exposed…