QuAlCu6 Rod – Laser Welding Wire Aluminium AlCu6 / ER2319 – Aerospace, Age-Hardenable
€227.29
QuAlCu6 Rod – Laser Welding Wire Aluminium AlCu6 / ER2319 – Aerospace, Age-Hardenable
QuAlCu6 is the AlCu wire for higher-strength aluminium components: EN ISO 18273 S Al 2319 (AlCu6MnZrTi) · AWS ER2319. The datasheet explicitly names the aerospace industry as its field of use.
It is an age-hardenable alloy — the strength comes not from welding but from the subsequent heat treatment. Copper (6.3 %) carries it, zirconium and titanium refine the grain. Important, and the datasheet says so explicitly: do not use on 5xxx aluminium alloys (AlMg) — copper and magnesium do not get along in the weld.
Recommended base materials
- AL 2219, AL 2014
- AlCu casting alloys
- Do not use on 5xxx aluminium alloys (AlMg) — datasheet
Typical applications
- Aerospace industry
- Higher-strength aluminium components
- AlCu castings
- Parts that are subsequently age hardened
Properties and advantages
- Age-hardenable — strength set after welding
- Cu 6.3 % with Zr and Ti for grain refinement
- Re 150 MPa · Rm 240 MPa · A 12 %
- Not for AlMg (5xxx)
Rod form: Rod lengths 1000 mm and 333 mm, Ø 0,3 mm – 0,8 mm.
Material analysis (wt.-%)
Cu 6.30 | Mn 0.30 | Zr 0.15 | Ti 0.15 | V 0.10 | Si 0.15 | Zn 0.10 | Al balance
Download
| Diameter: | 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
|---|---|
| Recommendations for basis material: | AL 2014, AL 2219, AlCu cast alloy , AlSiCu... e.g. AL2014,AL2036, AL2219, do not use with 5xxx - AL alloys |
| Rod length: | 333 mm, 1000 mm |
| Wire: | Laser welding wire |
Related products
QuAlCu6 is the AlCu wire for higher-strength aluminium components: EN ISO 18273 S Al 2319…
QuFe10 is the standard filler metal for modifying and repairing mould cavities in the…
QuFe10Cr is the CrMo-alloyed variant for highly stressed mould cavities in the tempered…
QuFe10NiMo is the NiMo-alloyed variant for modifying and repairing mould cavities — and,…
QuFe11 is a build-up wire for hot-work tools: DIN EN 14700 S Fe 13, filler material no.…
QuFe12 is the hard, temper-resistant build-up wire for hot-work tools: EN 14700 S Fe 3 ·…
QuFe13 is the welding filler from quada for highly stressed hot-work tools. The alloy is…