QuTitan2 TIG Filler Wire Titanium Grade 2 (CP-Ti / 3.7035)
QuTitan2 TIG Filler Wire Titanium Grade 2 (CP-Ti / 3.7035)
QuTitan2 is a TIG filler wire made of Grade 2 commercially pure titanium (material 3.7035). CP-Ti offers outstanding corrosion resistance in oxidising and chloride-bearing media, with high ductility and very good weldability — ideal for chemical apparatus construction, heat exchangers and marine technology.
Recommended base materials
- 3.7035 — commercially pure titanium Grade 2 (primary material)
- 3.7025 — commercially pure titanium Grade 1 (related, softer)
- 3.7055 — commercially pure titanium Grade 3 (related, stronger)
Typical applications
- Chemical apparatus and vessel construction
- Heat exchangers and condensers
- Seawater desalination and offshore technology
- Pickling, electroplating and electrolysis plants
- Repair and build-up welding on commercially pure titanium components
Properties and advantages
- Outstanding corrosion resistance in chlorides, seawater and oxidising acids
- High ductility — easily formable and weldable
- Low density, high specific strength, biocompatible
- Shielding gas: high-purity argon 4.6+ with trailing and root protection — gap-free contamination control is mandatory
TIG advantage: For applying material over large areas and building up thicker sections.
TIG welding wire packaging: 1,000 mm rods, 1 kg cardboard tubes, 5 kg cartons, Ø 1.0 mm; 1,6 mm und 2,0 mm.
Material analysis (wt.-%)
Fe ≤0.30 | O ≤0.25 | C ≤0.08 | N ≤0.03 | H ≤0.015 | Ti balance
Download
| Diameter: | 1,0 mm, 1,6 mm, 2,0 mm |
|---|---|
| Recommendations for basis material: | 3.7035, Titan |
| Rod length: | 1000 mm |
| Wire: | WIG wire |
Related products
QuTitan2 is a laser welding wire made of Grade 2 commercially pure titanium (material…
QuFe10 is the standard filler metal for modifying and repairing mould cavities in the…
QuFe10Cr is the CrMo-alloyed variant for highly stressed mould cavities in the tempered…
QuFe10NiMo is the NiMo-alloyed variant for modifying and repairing mould cavities — and,…
QuFe11 is a build-up wire for hot-work tools: DIN EN 14700 S Fe 13, filler material no.…
QuFe12 is the hard, temper-resistant build-up wire for hot-work tools: EN 14700 S Fe 3 ·…
QuFe13 is the welding filler from quada for highly stressed hot-work tools. The alloy is…