QuFe60 Bobbin – Laser Welding Wire High-Speed Steel 1.3348 / M7 – 58–63 HRC, Cutting Tools
€699.72
QuFe60 Bobbin – Laser Welding Wire High-Speed Steel 1.3348 / M7 – 58–63 HRC, Cutting Tools
QuFe60 is the high-speed steel wire: DIN EN 14700 S Fe 4 · ~AISI M7 · DIN 8555 MSG 4-60-S · filler no. 1.3348. At 58–63 HRC it is the hardest matching wire for tool steels in the range.
It is made for the manufacture and repair of cutting tools — drills, milling cutters, broaches, turning tools — and for hardfacing wear-prone tool edges. The hardness comes from the carbide content (Mo 8.3 % · V 1.8 % · W 1.9 % · C 1.0 %). Per the datasheet the first layer stays crack-free even on very critical steels; preheating is nevertheless recommended.
Recommended base materials
- Per the datasheet particularly suited to 1.3316, 1.3333, 1.3344, 1.3346
- High-speed steels (HSS) in general
Typical applications
- Drills, milling cutters, broaches, turning tools
- Hardfacing of wear-prone tool edges
- Manufacture and repair of cutting tools
- Repairs on HSS tools
Properties and advantages
- 58–63 HRC as welded
- First layer crack-free even on critical steels (datasheet)
- High carbide content: Mo 8.3 % · V 1.8 % · W 1.9 %
- Preheating recommended
Bobbin form: K125, K80, MA125, SH253 — wire weight 100 g–500 g, Ø 0,2 mm – 0,8 mm.
Material analysis (wt.-%)
C 1.00 | Si 0.30 | Mn 0.40 | Cr 4.00 | Mo 8.30 | W 1.90 | V 1.80 | Fe balance
Download
| Achievable hardness: | 58 - 63 HRC |
|---|---|
| Bobbin size: | K80, K125, MA125, SH253 |
| Bobbin weight: | 100 g, 200 g, 500 g |
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
| Recommendations for basis material: | 1.3316, 1.3333, 1.3344, 1.3346 |
| Refinish: | material typical treatment |
| Wire: | Laser welding wire |
Related products
QuFe60 is the high-speed steel wire: DIN EN 14700 S Fe 4 · ~AISI M7 · DIN 8555 MSG 4-60-S…
QuFe60 is the high-speed steel wire: DIN EN 14700 S Fe 4 · ~AISI M7 · DIN 8555 MSG 4-60-S…
QuLPA-Fe60 is the high-speed steel powder and, at 58–63 HRC, the hardest cladding powder…
Qu17-4PH is a precipitation-hardening, corrosion-resistant laser welding wire of the…
QuFe17 is a wire for joint welding on high-strength, quenched and tempered fine-grain…
QuNi22 is a corrosion-resistant laser welding wire of the nickel-base superalloy…
QuNi24 is a corrosion- and heat-resistant laser welding wire of the nickel-base…