Qu819 Rod – Laser Welding Wire Cold-Work Tooling 1.2767 / 1.2721 / 1.2714 – 46–48 HRC
€295.12
Qu819 Rod – Laser Welding Wire Cold-Work Tooling 1.2767 / 1.2721 / 1.2714 – 46–48 HRC
Qu819 is the build-up wire for cold-work tooling and plastic moulds: EN ISO 14700 S Fe 3 · 819BS · filler no. ~1.6773.
It matches the nickel-alloyed tool steels 1.2767 (X45NiCrMo4), 1.2721, the hammer steel 1.2714 (55NiCrMoV7) and 35NCD16 / 45NiCrMo18 / 60NiCrMo11. According to the datasheet its hallmark is the combination of high dimensional accuracy with high hardness and strength (46–48 HRC as welded) — exactly what a cavity or die needs when it is machined back to size after welding and then has to hold up in service.
Recommended base materials
- 1.2767 (X45NiCrMo4)
- 1.2721
- 1.2714 (55NiCrMoV7) — hammer steel
- 35NCD16, 45NiCrMo18, 60NiCrMo11 and similar
Typical applications
- Plastic moulds — cavities and parting edges
- Cold-work tooling
- Dies, cutting tools and hammer steels
- Parts that are machined back to size after welding
Properties and advantages
- 46–48 HRC as welded — hardness without post-weld heat treatment
- High dimensional accuracy per the datasheet
- Rm max. 912 MPa, A 12–19 %
- Machining behaviour typical for the material
Rod form advantage: Constant wire feed when building up parting edges and die cutting edges.
Rod form: Rod lengths 1000 mm and 333 mm, Ø 0,2 mm – 0,8 mm.
Material analysis (wt.-%)
C 0.35 | Si 0.30 | Mn 0.45 | Mo 0.25 | Cr 1.7 | Ni 3.7 | Fe balance
Download
| Achievable hardness: | 46 - 48 HRC |
|---|---|
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
| Recommendations for basis material: | 1.2714, 1.2721, 1.2767, 35NCD16, 45NiCr-Mo18, 60NiCrMo11 |
| Refinish: | material typical treatment |
| Rod length: | 333 mm, 1000 mm |
| Wire: | Laser welding wire |
Related products
Qu819 is the build-up wire for cold-work tooling and plastic moulds: EN ISO 14700 S Fe 3…
QuCu81 is the ductile one of the three aluminium bronzes: EN ISO 24373 S Cu 6327…
QuCu81 is the ductile one of the three aluminium bronzes: EN ISO 24373 S Cu 6327…
QuFe10 is the standard filler metal for modifying and repairing mould cavities in the…
QuFe10Cr is the CrMo-alloyed variant for highly stressed mould cavities in the tempered…
QuFe10NiMo is the NiMo-alloyed variant for modifying and repairing mould cavities — and,…
QuFe11 is a build-up wire for hot-work tools: DIN EN 14700 S Fe 13, filler material no.…