QuFe60 - Bobbin
Product number:
Qu6008-500-K80
Product information "QuFe60 - Bobbin"
QuFe60 is used for build-up and repair welding on new parts and repairs of cutting tools, e.g.
drills, milling tools, reamers, lathe chisels and cutting tools. Furthermore suitable for
hard-facing on tool parts and edges vulnerable to wear. Pre-heating is recommended, the
first layer is free from cracks even on critical steels.
Possible Hardness: 58 - 63 HRC. Dependent on layers and adaption.
Possible Hardness: 58 - 63 HRC. Dependent on layers and adaption.
Material analysis
C: 1,0 | Si: 0,3 | Mn: 0,4 | Cr: 4,0 | Mo: 8,3 | W: 1,9 | V: 1,8 | Fe: Rest
Download
| Bobbin size: | K80, K125, K250, MA125, SH253 |
|---|---|
| Bobbin weight: | 100 g, 200 g, 500 g |
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
| Recommendations for basis material: | 1.3316, 1.3333, 1.3344, 1.3346 |
| Refinish: | material typical treatment |
| Wire: | Laser welding wire |