QuFe31 - Rod
Product number:
Qu3108-S-1000
Product information "QuFe31 - Rod"
QuFe31 is used for reparings and hardfacings on cold and warm working tools, which need to hold
the high hardness and abrasion resistance. In comparison with QuFe30, this laser
welding wire is more resistant against abrasive wear.
High edge stability during dynamic stress.
Also used for resin molds with increased edge wear.
Possible Hardness: 54 - 60 HRC. Dependent on layers and hardness of the base material.
Possible Hardness: 54 - 60 HRC. Dependent on layers and hardness of the base material.
Material analysis
C: 0,35 | Si: 1,0 | Mn: 0,4 | Cr: 5,25 | Mo: 1,5 | V: 0,3 | W: 1,3 | Fe: Rest
Download
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
|---|---|
| Recommendations for basis material: | 1.2080, 1.2343, 1.2363, 1.2379, 1.2436, 1.2601, 1.2767 |
| Refinish: | Hardenable , NOT etchable , conditionally chromium plated, mechanically grindable , polishable |
| Rod length: | 333 mm, 1000 mm |
| Wire: | Laser welding wire |