QuFe30 - Bobbin
Product number:
Qu3002-100-K125
Product information "QuFe30 - Bobbin"
QuFe30 is especially applicable for the repairing of compression molds, blanking and cutting tools.
The hard and tough weld is resistant against high edge load and shows excellent edge
retention. Also applicable for multi layer welding.
Possible Hardness: 54 - 60 HRC. Dependent on conditioning and layers.
Possible Hardness: 54 - 60 HRC. Dependent on conditioning and layers.
Material analysis
C: 0,5 | Si: 3,0 | Mn: 0,5 | Cr: 9,5
| Bobbin size: | K80, K125, K250, MA125, SH253 |
|---|---|
| Bobbin weight: | 100 g, 200 g, 500 g |
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,7 mm, 0,8 mm |
| Recommendations for basis material: | 1.2080, 1.2379, 1.2436, 1.2601 |
| Refinish: | CVD-coatable , case-hardened, chrome-plated , nitridable , remunerable |
| Wire: | Laser welding wire |