QuFe11 - Bobbin
Product number:
Qu1108-100-K80
Product information "QuFe11 - Bobbin"
QuFe11 is due to its excellent hot wear resistance and toughness used for tough, hot wear
resistant build-ups on hot working tools and structural parts, which are subjected to
impact, compression and abrasion at elevated temperatures, such as forging dies and
hammers, die cast moulds, hot cutting knives, guides, vacuum chambers, continuous
casting rolls.
Possible Hardness: 38 – 42 HRC. Dependent on layers and hardness of the base material.
Possible Hardness: 38 – 42 HRC. Dependent on layers and hardness of the base material.
Material analysis
C: 0,1 | Si: 0,4 | Mn: 0,6 | Cr: 6,5 | Mo: 3,3 | Fe: Rest
Download
Bobbin size: | K80, K125, K250, MA125, SH253 |
---|---|
Bobbin weight: | 100 g, 200 g, 500 g |
Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
Recommendations for basis material: | 1.2343, 1.2344, 1.2367, 1.2606, 1.2764, 1.2765, 1.2766, 1.2767 |
Refinish: | CVD-coatable , chrome-plated , machinable , nitridable , polishable, remunerable |
Wire: | Laser welding wire |