QuFe10Cr - WIG
Product number:
Qu1012Cr-WIG
Product information "QuFe10Cr - WIG"
QuFe10Cr is
preferred for changes to and repairs of mould cavities made from tempered materials
1.2311, 1.2312, 1.2162, 1.2738, 1.2764 and 1.2767.
The Cr-content in the weld increases the tensile strength, cutting edge quality and the resistance to wear.
Can be used in the long term range for operating temperatures up to 570°C.
The Cr-content in the weld increases the tensile strength, cutting edge quality and the resistance to wear.
Can be used in the long term range for operating temperatures up to 570°C.
Possible
Hardness: 28 - 37 HRC.
Dependent on layers and hardness of the base material.
Material analysis
C: 0,1 | Si: 0,5 | Mo: 0,5 | Mn: 1,1 | Cr: 1,2 | Fe: Rest
Download
| Diameter: | 1,0 mm, 1,2 mm, 1,6 mm, 2,0 mm, 2,4 mm |
|---|---|
| Recommendations for basis material: | 1.2162, 1.2311, 1.2312, 1.2738, 1.2764, 1.2767, 13CrMo 4 4, 25CrMo4, 42CrMo4, AISI4130, AISI4140, GS-17 CrMo5 5 |
| Refinish: | Hardenable , chrome-plated , erodible , etable , nitridable , polishable, remunerable , structurable |
| Rod length: | 1000 mm |
| Wire: | WIG wire |